$ 145.64
$ 145.64
$ 145.64
-
Brand
| Brand: Akemi |
Akemi Akepox 2000 Flowing Two-Component Epoxy Adhesive — 1.5 kg
AKEPOX 2000 is AKEMI's solvent-free, two-component (Part A + Part B) liquid epoxy adhesive for the stone-fabrication industry. Its low-viscosity, flowing body wets out and penetrates very thin joints and doubles as a laminating resin with glass fabric, producing a weather-resistant, high-strength bond on marble, granite, cast stone, concrete and terrazzo. Supplied here in the 1.5 kg pack.
| Property | Detail |
|---|---|
| Brand | Akemi |
| Product | AKEPOX 2000 (flowing) |
| Article Number | 10618 |
| Type | Two-component epoxy adhesive (solvent-free) |
| Base Chemistry | Epoxy resin + modified polyamine hardener |
| Mixing Ratio | 2:1 (Part A : Part B) by weight or volume |
| Consistency | Liquid / low-viscosity (flowing) |
| Color | Part A light grey; Part B honey yellow |
| Pot Life (20°C / 68°F) | approx. 20–30 min (100 g A + 50 g B) |
| Pot Life (other temps) | 10°C: 60–70 min · 30°C: 10–15 min · 40°C: 5–10 min |
| Movable / Repositionable | after 6–8 hours (20°C) |
| Further Processing | after 12–16 hours (20°C) |
| Full Cure | maximum strength after 7 days (20°C) |
| Minimum Application Temp | do not use below 10°C (50°F) |
| Tintable | with AKEPOX Colouring Pastes / Concentrates, up to 5% |
| Weather Resistance | extremely weather-resistant |
| UV Note | hardened adhesive yellows in sunlight — not for visible joints on light/white stone |
| Pack Size | 1.5 kg |
- Low-viscosity flowing body — wets out and fills very thin joints
- Doubles as a laminating resin with glass fabric for reinforcement
- Solvent-free — low shrinkage and low stress in the bond line
- 2:1 mix ratio by weight or volume for consistent, repeatable results
- Extremely weather-resistant, high-strength cured bond
- Tintable up to 5% with AKEPOX colouring pastes/concentrates
Bonding and lamination of natural stone (marble, granite), cast stone, concrete and terrazzo; inlay work, crack filling and glass-fabric reinforcement. Also bonds many plastics (rigid PVC, polyester, polystyrene, ABS, polycarbonate), wood and glass. Because the cured resin yellows in sunlight, avoid visible fillings or joints on light or white surfaces.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.