-
Model
Aardwolf DSA Suction Cup — Water Dam for Stone Core Drilling
The Aardwolf DSA Suction Cup mounts on a stone surface and instantly creates a water reservoir for cooling diamond core bits. The DSA05 fits 1.5 inch core bits; the DSA06 fits 2 inch bits and faucet openings up to 2 inches. A clean rubber seal lets the cup hold water for the entire drilling cycle.
Features
- DSA05 sized for 1.5 inch (38 mm) core bits
- DSA06 sized for 2 inch (51 mm) core bits and faucet holes
- Forms an instant water dam to keep diamond bits cool
- Soft rubber seal grips polished stone without leaving marks
- Removes after the cut without residue or surface damage
- Lightweight and reusable across many countertop jobs
- Compact enough to carry on a stone-installation tool roll
DSA05 — Coring Suction Cup 1-1/2 in
| Property | Detail |
|---|---|
| Brand | Aardwolf |
| Model | DSA05 |
| Cup Size | Fits core bits up to 1.5 in (38 mm) |
| Material | Rubber with reinforced rim |
| Use | Water dam for diamond core drilling |
| Reusable | Yes |
DSA06 — Coring Suction Cup 2 in
| Property | Detail |
|---|---|
| Brand | Aardwolf |
| Model | DSA06 |
| Cup Size | Fits core bits up to 2 in (51 mm) |
| Application | Faucet/tap holes in countertops |
| Material | Rubber with reinforced rim |
| Use | Water dam for diamond core drilling |
| Reusable | Yes |
- Mark the hole center on the slab using a pencil or wax marker.
- Wet the rubber rim and press the cup onto the slab over the mark.
- Fill the cup with water until the bit will be fully submerged.
- Drill straight down through the cup, keeping the bit centered.
- Lift the cup off, dump the water, and dry the slab area.
- Wear eye protection and a dust mask when drilling stone.
Granite, marble, quartzite, engineered quartz, porcelain, and other smooth, non-porous countertop stone. Best on polished or honed surfaces where the rubber rim seals fully.
Always wear appropriate PPE. Follow local safety regulations when using power tools or chemical products.
Especificaciones
| Model | DSA05, DSA06 |