Alpha Professional Tools VFlex Disc

(0 reseña)

$ 70,88

$ 1,00

Marca
Size
- 5"
- 7"
Grit
- #35
- #50
- #80
Arbor
- 5/8"-11
- 7/8"

Terms and Conditions

Marca: Alpha

Alpha® VFlex™ Flexible Diamond Sanding Disc 5", #35, 7/8" Arbor (VDF5035)

The Alpha® VFlex™ flexible diamond sanding disc is built for paint, coating, oxide and rust removal, plus burr grinding and chamfering on steel, stainless steel and contoured surfaces. A rubber-sandwich body lets the disc conform to curves while dramatically reducing noise and vibration — an everyday improvement over rigid discs on irregular work. It also runs cleanly on stone, ceramic, composite, cast iron and glass. This listing is VDF5035: 5" diameter, #35 grit, 7/8" arbor for high-speed angle grinders.

Features

Flexible rubber-sandwich body conforms to contoured and irregular surfaces
Removes paint, coatings, oxide and rust from steel and stainless steel
Deburrs and chamfers metal edges without clogging
Also shapes natural stone, engineered stone/quartz, ceramic, composite, cast iron and glass
Rubber damping dramatically reduces operator-felt noise and vibration
Long life and consistent cut reduce downtime and tool changes
Available 5" and 7" with 7/8" arbor or 5/8"-11 zinc hub

Models / Part Numbers

Part No.	Diameter	Grit	Arbor	Max RPM	UPC
VDF5035	5"	#35	7/8"	5,000 RPM	749173670688
VDF503H	5"	#35	5/8"-11	5,000 RPM	749173670695
VDF5050	5"	#50	7/8"	5,000 RPM	749173670701
VDF505H	5"	#50	5/8"-11	5,000 RPM	749173670718
VDF5080	5"	#80	7/8"	5,000 RPM	749173670725
VDF508H	5"	#80	5/8"-11	5,000 RPM	749173670732
VDF703H	7"	#35	5/8"-11	5,000 RPM	749173670756
VDF705H	7"	#50	5/8"-11	5,000 RPM	749173670770
VDF708H	7"	#80	5/8"-11	5,000 RPM	749173670794
VDF7035	7"	#35	7/8"	5,000 RPM	749173670749
VDF7050	7"	#50	7/8"	5,000 RPM	749173670763
VDF7080	7"	#80	7/8"	5,000 RPM	749173670787

How to Use

Confirm the disc diameter and arbor match your tool — this VDF5035 is 5" with a 7/8" arbor.
Mount on a high-speed angle grinder, sander or polisher using the tool's original flange and lock nut (7/8" arbor) or thread directly onto a 5/8"-11 spindle (zinc-hub models).
Verify grinder no-load RPM does not exceed 5,000 RPM — the maximum for all VFlex sizes.
Start with #35 grit for aggressive stock removal, #50 for general purpose, #80 for finer finish work.
Run dry, or feed water at the disc face to suppress dust.
For virtually dust-free grinding on stone, pair with an Ecoguard dust shroud and HEPA vacuum. Note: some metal powders are combustible — verify material safety before vacuum collection.
Apply light, even pressure and let the flexible body match the work surface — pressing hard reduces life and cut quality.
Inspect the disc before each use; replace if torn, glazed or worn below useful diamond depth.

Specifications by Variant

VFlex Flexible Diamond Sanding Disc 5", #35 grit, 7/8" arbor — VDF5035

Part No.	VDF5035
UPC	749173670688
Type	VFlex Flexible Diamond Sanding Disc 5", #35 grit, 7/8" arbor
Max RPM	5,000 RPM
Packaged Weight	0.55 lbs
Commodity Code	6804.21.0000
Country of Origin	Korea

VFlex Flexible Diamond Sanding Disc 5", #35 grit, 5/8"-11 arbor — VDF503H

Part No.	VDF503H
UPC	749173670695
Type	VFlex Flexible Diamond Sanding Disc 5", #35 grit, 5/8"-11 arbor
Max RPM	5,000 RPM
Packaged Weight	0.65 lbs
Commodity Code	6804.21.0000
Country of Origin	Korea

VFlex Flexible Diamond Sanding Disc 5", #50 grit, 7/8" arbor — VDF5050

Part No.	VDF5050
UPC	749173670701
Type	VFlex Flexible Diamond Sanding Disc 5", #50 grit, 7/8" arbor
Max RPM	5,000 RPM
Packaged Weight	0.55 lbs
Commodity Code	6804.21.0000
Country of Origin	Korea

VFlex Flexible Diamond Sanding Disc 5", #50 grit, 5/8"-11 arbor — VDF505H

Part No.	VDF505H
UPC	749173670718
Type	VFlex Flexible Diamond Sanding Disc 5", #50 grit, 5/8"-11 arbor
Max RPM	5,000 RPM
Packaged Weight	0.65 lbs
Commodity Code	6804.21.0000
Country of Origin	Korea

VFlex Flexible Diamond Sanding Disc 5", #80 grit, 7/8" arbor — VDF5080

Part No.	VDF5080
UPC	749173670725
Type	VFlex Flexible Diamond Sanding Disc 5", #80 grit, 7/8" arbor
Max RPM	5,000 RPM
Packaged Weight	0.55 lbs
Commodity Code	6804.21.0000
Country of Origin	Korea

VFlex Flexible Diamond Sanding Disc 5", #80 grit, 5/8"-11 arbor — VDF508H

Part No.	VDF508H
UPC	749173670732
Type	VFlex Flexible Diamond Sanding Disc 5", #80 grit, 5/8"-11 arbor
Max RPM	5,000 RPM
Packaged Weight	0.65 lbs
Commodity Code	6804.21.0000
Country of Origin	Korea

VFlex Flexible Diamond Sanding Disc 7", #35 grit, 5/8"-11 arbor — VDF703H

Part No.	VDF703H
UPC	749173670756
Type	VFlex Flexible Diamond Sanding Disc 7", #35 grit, 5/8"-11 arbor
Max RPM	5,000 RPM
Packaged Weight	1.55 lbs
Commodity Code	6804.21.0000
Country of Origin	Korea

VFlex Flexible Diamond Sanding Disc 7", #50 grit, 5/8"-11 arbor — VDF705H

Part No.	VDF705H
UPC	749173670770
Type	VFlex Flexible Diamond Sanding Disc 7", #50 grit, 5/8"-11 arbor
Max RPM	5,000 RPM
Packaged Weight	1.55 lbs
Commodity Code	6804.21.0000
Country of Origin	Korea

VFlex Flexible Diamond Sanding Disc 7", #80 grit, 5/8"-11 arbor — VDF708H

Part No.	VDF708H
UPC	749173670794
Type	VFlex Flexible Diamond Sanding Disc 7", #80 grit, 5/8"-11 arbor
Max RPM	5,000 RPM
Packaged Weight	1.55 lbs
Commodity Code	6804.21.0000
Country of Origin	Korea

Common Specifications

Property	Detail
Type	Flexible diamond sanding disc, rubber-sandwich construction
Primary Materials	Steel, stainless steel; also stone, ceramic, composite, cast iron, glass
Grits Available	#35 (coarse), #50 (medium), #80 (fine)
Diameters Available	5", 7"
Arbors Available	7/8" or 5/8"-11 zinc hub
Max RPM	5,000 RPM (all sizes)
Use	High-speed angle grinder, sander or polisher; dry or wet
Country of Origin	Korea

Related & Companion Products

FAQs

What is the VFlex disc designed to do?

Paint, coating, oxide and rust removal; burr grinding and edge chamfering on steel, stainless steel and contoured surfaces. It also runs on stone, ceramic, composite, cast iron and glass.

How is VFlex different from a rigid disc?

The VFlex has a flexible rubber-sandwich body that conforms to curves and irregular surfaces. It cuts cleaner on contoured work and reduces noise and vibration compared to a rigid disc.

Can I run VFlex wet?

Yes — VFlex works dry or with water fed at the disc face to suppress dust.

What max RPM should I set?

Maximum 5,000 RPM for all VFlex sizes (5" and 7"). Confirm your grinder no-load speed before mounting.

Which grit should I choose?

#35 for aggressive stock removal, #50 for general purpose, #80 for finer finishing.

Can I use VFlex for dust-free grinding?

Pair the VFlex with an Alpha Ecoguard dust shroud and a HEPA vacuum for virtually dust-free operation on stone. For metal grinding, confirm the metal powder is safe to collect with a vacuum — some are combustible.

Videos

VFlex Sanding Disc

Documentation

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.