Ir al contenido

Tenax Domo 10 A+B Knife-Grade Epoxy — Part A Resin, 4 L

Domo 10 is a two-part knife-grade epoxy mastic and one of the strongest adhesives in the stone industry — the stone will break before the bond fails. It bonds polished, damp and dry surfaces, indoors or out, and holds up in extreme heat and below freezing. This item is the Part A (resin) component, 4 L; mix 1:1 with Domo 10 Part B before use.

PropertyDetail
BrandTenax
TypeTwo-part knife-grade epoxy mastic
This itemPart A (resin), 4 L
Mix ratio1:1 (Part A : Part B)
AppearanceWhite paste (tintable with Tenax Universal Colors)
Density at 25°C (Part A)1.2-1.3 g/cm³
Gel time in mass (25°C)2 h 30 min
Workability time (25°C)24 h
ConsumptionBonding 30-40 m²; grouting 20-30 linear m
Bonds on wet surfacesYes
TemperatureWorks below 32°F (0°C) and in high heat
UseInterior and exterior
VOCCompliant
Shelf lifeAt least 2 years at 65-77°F
  • Bond so strong the stone breaks before the adhesive fails
  • Bonds polished, damp and dry surfaces — including on wet
  • Tintable with Tenax Universal Colors
  • Interior and exterior; performs in extreme heat and below freezing
  • Part A must be mixed 1:1 with Domo 10 Part B to cure

Seaming, anchoring, laminating, mitering, rodding and repair of natural and engineered stone.

Wear appropriate PPE. Follow manufacturer instructions and safety regulations.