Ir al contenido
  1. Todos los productos
  2. Auto Edge Machine Tools
  3. Bullnose & Beveled Edge Wheels
  4. Tenax 5" Snail Lock Automated Edge Full Bullnose Polishing Wheel
  5. Bullnose & Beveled Edge Wheels
Lista de precios: General Price List (USD) Lista de precios
Lista de precios: General Price List (USD) Lista de precios

Tenax 5" Snail Lock Automated Edge Full Bullnose Polishing Wheel

(0 reseña)
$ 94,64 $ 94,64
$ 82,80
  • Marca
  • Grit
Contacta con nosotros
Terms and Conditions
Grit #220, #320, #320 W, #400 W, #800 W, #1200 W, #2000 W, #3000 W
Marca Tenax

Tenax 5" Snail-Lock Automated Edge Full Bullnose Polishing Wheel

The Tenax LT125FB0120 is a 5" (125 mm) snail-lock diamond polishing wheel cut to a full-bullnose profile, made for automated edge machines. The wheel produces the rounded full-bullnose edge profile in a single setup, removing the need for a multi-step manual hand-polish on the edge. Snail-lock mount makes it tool-free to swap on standard automated CNC and linear edge polishers.

Features

  • Flat (Eased) Edges
  • Bullnose Edges
  • Granite & Natural Stone (Marble, Limestone, Travertine, Sandstone, Onyx, Serpentine, Alabaster)
  • Quartz & Engineered Stone
  • Available in multiple grits for full polishing sequences
  • Available in multiple diameters
  • High-gloss, high-speed polishing system
  • Superior edge clarity and shine
  • Excellent wheel life
  • Snail Lock attachment for secure, fast mounting
  • Professional-grade automated edge polishing solution
  • Produces factory-level finishes
  • Designed for high-production fabrication shops
  • Reliable performance across all grit stages
  • Durable construction for extended service life
Property Detail
Brand Tenax
Part Number LT125FB0120
Diameter 5 in (125 mm)
Mount Snail-lock
Profile Full bullnose
Grit Code 120 (per part-number suffix)
Application Automated edge polishing
Unit Weight 3.3 lb (1.5 kg)
  1. Mount the wheel on a snail-lock spindle.
  2. Verify water feed reaches the diamond face.
  3. Run the machine at the wheel's recommended RPM and feed for the stone type.
  4. Make a light contact pass first to check profile alignment.
  5. Run the production pass; check edge quality after each wheel change in the stack.
  • Wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator.
  • Use cut-resistant gloves where applicable.
  • Verify the tool is rated for the stone material before starting.
  • Inspect the tool before each shift; remove from service if cracks or excessive wear are visible.

Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator when running stone abrasives. Verify wet water feed before each cut where applicable.