Ir al contenido
  1. Todos los productos
  2. Core Bits
  3. Dry Core Bits
  4. Alpha Core Bit Extenders
  5. Dry Core Bits
Lista de precios: General Price List (USD) Lista de precios
Lista de precios: General Price List (USD) Lista de precios
Alpha Core Bit Extenders

Alpha Core Bit Extenders

(0 reseña)
  • Convert Your Rotary/Hammer Drill With The SDS-Plus Fitting Into A Core Drill With A 5/8"-11 Thread
  • Extend Reach In Hard To Access Areas
  • Effortlessly Switch Between Accessories And Sizes
  • Made With High Strength Steel
  • Perfect For Thick Materials Such As Cutting Through Concrete, Brick, Pavers, Stone, And More
  • Compatible With Diamond-Tipped Core Bits For Dry Coring To Extend The Reach
  • *Must Be Used Without Percussion of Rotary Hammer/Hammer Drill

$ 50,34 $ 50,34
$ 50,34

  • Type
Terms and Conditions
Shipping: 2-3 Business Days
Contáctenos
Documentos
LaserCoreBit_Extender_flyer.pdf NewFromAlpha2024.pdf

Core Bit Extenders

Alpha® now offers a Core Bit Extender which allows you to drill hollow concrete blocks from one side for both walls. The Extender ca n be used on hammer drills and rotary hammers. The Extender, with 5/8”-11 female thread, is available with an SDS Plus or ½” Hex Shank and comes in lengths of 6” or 10”.

Features

  • Convert Your Rotary/Hammer Drill With The SDS-Plus Fitting Into A Core Drill With A 5/8"-11 Thread
  • Extend Reach In Hard To Access Areas
  • Effortlessly Switch Between Accessories And Sizes
  • Made With High Strength Steel
  • Perfect For Thick Materials Such As Cutting Through Concrete, Brick, Pavers, Stone, And More
  • Compatible With Diamond-Tipped Core Bits For Dry Coring To Extend The Reach
  • *Must Be Used Without Percussion of Rotary Hammer/Hammer Drill
CBESDSS — 6" (150mm) / SDS Plus Shank Short
PropertyDetail
Part No.CBESDSS
Size6" (150mm)
TypeSDS Plus Shank Short
Threads5/8"-11
For Use OnHammer Drill/Rotary Hammer
ContainerShank Adapter, Pilot Bit and Screw
CBESDSL — 10" (250mm) / SDS Plus Shank Long
PropertyDetail
Part No.CBESDSL
Size10" (250mm)
TypeSDS Plus Shank Long
Threads5/8"-11
For Use OnHammer Drill/Rotary Hammer
ContainerShank Adapter, Pilot Bit and Screw
Flyer : — Laser Core Bit & Core Bit Extender Flyer
PropertyDetail
Part No.Flyer :
SizeLaser Core Bit & Core Bit Extender Flyer
  1. Secure the drill bit in your drill press or angle grinder using the correct adapter.
  2. Mark the drilling position and start at low RPM to establish the hole.
  3. Apply steady, even pressure without forcing the bit through the material.
  4. Use water for wet drilling to cool the bit and extend its life.
  5. Always wear appropriate PPE including safety glasses and hearing protection.
  • Concrete
  • Natural Stone

Always wear appropriate PPE. Follow local safety regulations when using power tools or chemical products.

Especificaciones

Type 5/8"-11, Short, 4" 5/8-11