$ 16,49
$ 16,49
$ 16,49
-
Marca
| Marca: Alpha |
Alpha® ECOVAKIT — Vacuum Adapter Kit for Ecoguard D
The Alpha® ECOVAKIT is the vacuum adapter kit that converts the Ecoguard Type D dust-collection cover (DL or DS) from a passive debris catcher into a continuous, vacuum-extracted dust system. It connects the Ecoguard D housing to a standard wet/dry vacuum hose so concrete, masonry and wood dust is pulled directly off the bit during overhead and wall drilling — eliminating the need to stop and empty the chamber.
Features
- Converts the Ecoguard D (DL or DS) to active vacuum dust extraction
- Connects directly to standard wet/dry vacuum hoses
- Eliminates manual debris emptying during long drilling runs
- Lightweight, compact — under 1/4 lb packaged
- Compatible with both Ecoguard D Short (ECOGRDDS) and Long (ECOGRDDL)
- Ideal for overhead, wall and structural anchor drilling
- Helps meet OSHA silica dust-control practices when paired with a HEPA vacuum
| Part No. | Description | Recommended For | UPC |
|---|---|---|---|
| ECOVAKIT | Vacuum Adapter Kit | Use with Ecoguard D (DL & DS) | 749173661594 |
- Install the Ecoguard D (DL or DS) onto your hammer drill per its manual.
- Snap the ECOVAKIT adapter into the debris-chamber outlet on the Ecoguard D housing.
- Connect the adapter to a standard wet/dry vacuum hose — a HEPA vacuum is recommended for silica control.
- Turn on the vacuum first, then drill normally; dust is extracted continuously at the bit.
- For overhead work, keep the vacuum running throughout the run — no need to stop and empty.
- After use, disconnect the hose; the adapter stays mounted on the Ecoguard D for the next job.
Vacuum Adapter Kit — ECOVAKIT
| Part No. | ECOVAKIT |
| UPC | 749173661594 |
| Type | Vacuum Adapter Kit |
| Recommended For | Adapts Ecoguard D dust cover to a wet/dry vacuum hose |
| Packaged Weight | 0.25 lbs |
| Package Dimensions | 6" x 2" x 10" |
| Commodity Code | 3926.90.9090 |
| Country of Origin | China |
| Property | Detail |
|---|---|
| Application | Vacuum extraction add-on for Ecoguard D dust covers |
| Works With | Alpha® Ecoguard D Long (ECOGRDDL) and Short (ECOGRDDS) |
| Hose Compatibility | Standard wet/dry vacuum hoses |
| Recommended Pairing | HEPA wet/dry vacuum for OSHA silica compliance |
| Country of Origin | China |
What does the ECOVAKIT do?
It adapts the Ecoguard D (Long or Short) dust-collection cover so it can connect to a wet/dry vacuum hose — turning the passive debris chamber into an active, continuous dust-extraction system.
Is the Ecoguard D included with the ECOVAKIT?
No. The ECOVAKIT is an adapter kit only; you need an Ecoguard D Long (ECOGRDDL) or Short (ECOGRDDS) cover separately.
Which vacuums work with the ECOVAKIT?
Standard wet/dry vacuums with a typical 1-1/4" hose. A HEPA-rated wet/dry vacuum is recommended for crystalline-silica dust control.
Will it work with the Ecoguard CD (core drilling cover)?
No. The ECOVAKIT is sized for the Ecoguard D housing. The Ecoguard CD already connects to a vacuum hose directly.
Does the ECOVAKIT help with OSHA silica compliance?
When paired with a HEPA wet/dry vacuum, the Ecoguard D + ECOVAKIT combination supports OSHA Table 1 dust-control practices for drilling in concrete and masonry. Always verify your final setup against the current OSHA standard.
Catching Concrete Dust on Overhead Drilling with Ecoguard D + ECOVAKIT
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.