$ 28,70
$ 28,70
$ 28,70
-
Marca
| Marca | Fila |
FILA HYDROREP — Water Repellent Sealer for Natural Stone & Concrete (1 Liter)
FILA HYDROREP is a solvent-based, ready-to-use water repellent sealer. It protects exterior surfaces and grout joints from water and humidity by creating a water repellent, breathable barrier, and does not alter the material's natural finish.
| Property | Detail |
|---|---|
| Brand | FILA |
| Product | HYDROREP — WATER REPELLENT SEALER |
| Type | Solvent-based, ready to use, no dilution necessary |
| Suitable Surfaces | All unpolished natural stone, concrete, terracotta |
| Application | On a clean, dry surface apply an even, generous coat with a brush, roller or airless sprayer until the surface is fully saturated, then wait 8 hours |
| Application Temperature | 41°F to 86°F (5°C to 30°C) |
| Recoat | Dense natural stone: one coat. Concrete and porous natural stone: two coats. To add an oil repellent barrier on exteriors, apply a finishing coat of FOB after 8 hours |
| Drying / Cure | Normal foot traffic after 8 hours; full cure and maximum sealer protection in 24 hours |
| Coverage - 1 Liter | Natural stone: 215 sq ft (20 m²); concrete: 54-107 sq ft (5-10 m²) per coat (coverage rates are indicative) |
| Storage Temperature | 32°F to 86°F (0°C to 30°C) |
| Warning | Test on a small, inconspicuous area or loose sample for color changes. Do not apply outdoors if rain is in the forecast. Does not protect against acid stains |
| Packaging | 33.8 fl oz (1 L) |
- Water repellent, breathable barrier
- Does not alter the material's natural finish and does not yellow over time
- Long lasting, renewable protection
- High penetration and very high coverage rates
- Guards the surface against moss, mold and efflorescence
- PFAS free
HYDROREP protects exterior surfaces and grout joints from water and humidity, prevents wear caused by weather damage and guards against moss, mold and efflorescence. FILA describes it as ideal for thin brick and concrete, and for all unpolished natural stone and terracotta.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.