$ 17,98
$ 17,98
$ 36,97
-
Marca
-
Size
| Marca: MB Stone Care |
MB Stone Care MB-11® Touch Up Etch Remover & Marble Polishing Powder
MB-11® Touch Up is a hand-applied etch remover and polishing powder built from specialty abrasives and catalysts, so spot polishing takes no power tool at all. It is made for removing light water stains and rings from polished marble, travertine and other calcite-based stone, and works best on light to beige colored stone. Application is simple: a damp folded white cloth, a thin tap of powder, and vigorous back-and-forth rubbing over the affected spot. It is strictly a light-etch product and is not intended for honed finishes or dark stone.
Features
- Blend of specialty abrasives and catalysts formulated for hand application, no power tool required
- Targets light water stains, rings and surface etching on polished marble, travertine and other calcite-based stone
- Best results on polished light to beige colored marble
- Spot-repair format: treat only the damaged area instead of refinishing the whole surface
- Applied with a folded white cloth or microfiber dampened with water
- Technical rating 2 of 5 on the manufacturer scale, so it is approachable for careful non-specialists
- Packed by weight, not by volume, in a 1 oz kit and an 8 oz jar
- Not for honed finishes and not for dark stone
| Part No | Size | Format |
|---|---|---|
| MB-11-1OZ-KIT | 1 oz | Kit |
| MB-11-8oz | 8 oz | Jar |
- Test the powder first on a spare tile or an inconspicuous area before treating the visible surface.
- Wear rubber gloves the whole time you handle the product.
- Clean the surface first with a stone-safe cleaner such as Easy Oxy Multi-Surface Cleaner.
- Fold a clean white cloth or microfiber twice to make four layers and wrap it tightly around your fingers and knuckles, holding the loose end out of the way in your palm.
- Spritz the wrapped fingers with water and squeeze out the excess. The cloth should be damp, not wet.
- Tap the damp cloth into the powder to pick up a thin, consistent layer with no loose flaking.
- Rub the affected area vigorously back and forth, quickly and with heavy pressure, for roughly 10 strokes, then finish with a few circular motions.
- Do not wipe residue away dry. Wipe the paste off in a single motion with the loose part of the towel, spray the spot with a pH-neutral cleaner such as MB-5 Stone & More, and buff clean with a second, unused microfiber cloth.
- Inspect the repaired area and repeat with the same cloth as needed, adding a little more water if required.
| Property | Detail |
|---|---|
| Brand | MB Stone Care |
| Product Name | MB-11 Touch-Up Etch Remover |
| Product Type | Marble polishing and etch removal powder |
| Technical Rating | 2 of 5 (1 easy, 5 difficult) |
| Best Used On | Polished light to beige marbles |
| Application Method | Hand rubbing on surface etching that is not rough to the touch |
| Applicator | White cloth (not included) |
| Not For Use On | Honed finishes and dark stone |
| Available Sizes | 1 oz kit, 8 oz jar |
| Packed By | Weight, not volume |
| Developer | MB Stone Care® |
What damage is MB-11 Touch Up meant to fix?
It is a spot treatment for light water stains, rings and light surface etching on polished marble, travertine and other calcite-based stone.
Do I need a polisher or grinder to use it?
No. The formula is designed to be worked by hand with a damp folded white cloth, which is what makes it practical for small repairs.
Which stones should I keep it away from?
Do not use it on honed finishes or on dark stone. It is formulated for polished light to beige colored calcite-based stone.
How do I know if my etching is light enough?
Run your hand over the mark. The product works on surface etching that is not rough or felt underfoot. Deeper damage that you can feel needs mechanical refinishing instead.
What do I do with the leftover paste?
Do not wipe it away dry. Remove it in one motion with the loose part of the towel, spray the spot with a pH-neutral cleaner, then buff with a second clean microfiber cloth.
Can I reuse the application cloth to buff?
No. Always buff with a separate cloth. Reusing the application cloth reintroduces abrasive to the surface.
Should I test before treating the whole area?
Yes. Always run a small-scale test on a spare tile or an inconspicuous spot, and wear rubber gloves throughout.
What is the difference between the 1 oz kit and the 8 oz jar?
The 1 oz kit is the small starter format for single spot repairs; the 8 oz jar is the bulk refill for repeat use. Both contain the same powder, packed by weight.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.