-
Marca
| Marca | Marmo Elettromeccanica |
| Marca | Marmo Elettromeccanica |
This is the MEM3000 safety electrical conversion unit (transformer) built by Marmoelettromeccanica to power the Master 3500 portable contouring router. The Master 3500 runs on a very low-voltage, 48V supply for operator safety, so it must never be connected directly to mains power — it is always run through this conversion unit. The MEM3000 steps three-phase mains supply down to that 48V output, is double insulated, and is CE marked to international low-voltage safety regulations.
| Property | Detail |
|---|---|
| Type | Safety Electrical Conversion Unit (Transformer) |
| Model | MEM3000 |
| Input Voltage | 220V / 380V / 415V, 3-Phase |
| Output Voltage | 48V low-voltage output |
| Power Rating | 3000 W (1500 W tap available) |
| Insulation / Certification | Double insulated; CE marked to international safety regulations |
| Used With | Marmoelettromeccanica Master 3500 portable contouring router (3.5 HP, 48V, 50/60 Hz three-phase asynchronous motor) |
| Manufacturer | Marmoelettromeccanica S.r.l., Rignano Flaminio, Italy |
The Master 3500 is designed to run on very low voltage (48V) for operator safety on the jobsite, where the router is used with its integrated water system. The MEM3000 is the conversion unit that makes this possible: it takes a standard three-phase mains supply and steps it down to that 48V output. The router should never be connected directly to mains power — it is always run through this transformer.