$ 21,30
$ 21,30
$ 21,30
-
Marca
-
Size
| Size | 4", 5" |
| Marca | Alpha |
Alpha® GV Backer Pads for Makita® GV5000
Alpha® GV Backer Pads are hook-and-loop backer pads engineered specifically for the Makita® GV5000 Sander — a preferred tool for marble polishing applications. They eliminate messy adhesives by accepting hook-and-loop sandpaper, felt wheels and other discs, and are rigid enough for flat work while flexible enough to follow bullnosed edges. Use on stone, tile, metal, wood and glass.
Features
- Hook-and-loop backing — no messy adhesives required
- Designed exclusively for the Makita® GV5000 Sander 8mm female spindle
- M8-1.25 male thread; available in 4" and 5" diameters
- Rigid for flat surfaces yet flexible enough to follow bullnosed edges
- Use with sandpaper, felt wheels and other hook-and-loop accessories
- Suitable for stone, tile, metal, wood and glass
- Maximum operating speed 4,500 RPM
- Made in the USA
| Part No. | Size | Max RPM | Thread | For Use On | UPC |
|---|---|---|---|---|---|
| GV4MPPD | 4" | 4,500 | M8-1.25 Male | Makita® GV5000 Sander | 749173440229 |
| GV5MPPD | 5" | 4,500 | M8-1.25 Male | Makita® GV5000 Sander | 749173440014 |
- Confirm the host tool is a Makita® GV5000 Sander with the 8mm female spindle — the GV Backer Pad is not compatible with other polishers.
- Thread the M8-1.25 male stud of the backer pad fully onto the GV5000 spindle by hand until snug.
- Press a hook-and-loop sandpaper disc or felt wheel of the matching diameter (4" or 5") squarely onto the face of the pad.
- Set tool speed at or below the 4,500 RPM maximum rated for the backer pad.
- Apply light, even pressure; let the abrasive do the work to preserve the hook-and-loop layer.
- Replace the abrasive disc when worn; inspect the backer pad face for tears and replace the pad if the hook layer is damaged.
4" Hook-and-Loop Backer Pad for Makita® GV5000 — GV4MPPD
| Part No. | GV4MPPD |
| UPC | 749173440229 |
| Type | 4" Hook-and-Loop Backer Pad for Makita® GV5000 |
| Packaged Weight | 0.20 lbs |
| Package Dimensions | 8" x 5" x 0.5" |
| Commodity Code | 8466.91.0000 |
| Country of Origin | USA |
5" Hook-and-Loop Backer Pad for Makita® GV5000 — GV5MPPD
| Part No. | GV5MPPD |
| UPC | 749173440014 |
| Type | 5" Hook-and-Loop Backer Pad for Makita® GV5000 |
| Packaged Weight | 0.30 lbs |
| Package Dimensions | 9.5" x 6" x 1" |
| Commodity Code | 8466.91.0000 |
| Country of Origin | USA |
| Property | Detail |
|---|---|
| Backing Type | Hook and Loop |
| Thread | M8-1.25 Male |
| Max RPM | 4,500 |
| Host Tool | Makita® GV5000 Sander |
| Materials | Stone, tile, metal, wood, glass |
| Country of Origin | USA |
Which tool does the GV Backer Pad fit?
Only the Makita® GV5000 Sander. The pad uses an M8-1.25 male thread that matches the GV5000's unique 8mm female spindle and will not fit other polishers.
What sizes are available?
4" (GV4MPPD) and 5" (GV5MPPD) diameters.
What is the maximum safe operating speed?
4,500 RPM. Do not exceed this speed.
What can I attach to a GV Backer Pad?
Any 4" or 5" hook-and-loop abrasive — sandpaper discs, felt wheels, and similar accessories.
What materials can I work on?
Stone, tile, metal, wood and glass.
Where is the GV Backer Pad manufactured?
Made in the USA.
Is the GV Backer Pad rigid or flexible?
It is rigid enough for flat-surface work yet flexible enough to follow bullnosed edges.
No product-specific videos are currently available from the manufacturer or DST.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.