$ 42,15
$ 42,15
$ 42,15
-
Marca
| Marca: Alpha |
Alpha Professional Tools Turboshine Dual Adapter 3" Backer Pad (DAS35/8PD)
The Alpha® Turboshine Dual Adapter is a 3" (76 mm) backer pad with a 5/8"-11 thread, engineered as the drive interface for the Turboshine polishing system. Its newly designed Dual Adapter System dramatically reduces vibration during operation and lets the operator switch between rigid Turboshine discs and Alpha® Buff pads on the same drive, improving user convenience and reducing downtime between grits on natural and engineered stone countertops.
Features
- Dual Adapter System — runs all 3" Turboshine rigid polishing discs and 3" Alpha® Buff pads from a single backer.
- Significantly reduced vibration versus traditional hook-and-loop adapters.
- Quick grit-to-grit changeover with no equipment swap.
- 5/8"-11 female thread for direct mounting on common polishers (e.g. VSP-320).
- Maximum operating speed 6,000 RPM.
- 3" (76 mm) outer pad diameter, optimized for seamless countertop installations and scratch removal.
| Part No | Diameter | Thread | Use | UPC |
|---|---|---|---|---|
| DAS35/8PD | 3" (76 mm) | 5/8"-11 | Turboshine Discs | 749173472282 |
- Confirm the polisher spindle is 5/8"-11 and unplugged or with battery removed before mounting.
- Thread the DAS35/8PD adapter onto the polisher spindle and tighten by hand until fully seated.
- Press the desired Turboshine 3" rigid disc or Alpha® Buff pad onto the dual adapter face.
- Operate at or below 6,000 RPM; use wet for resin-bond rigid discs per Alpha® guidelines.
- Inspect the adapter face for wear before each shift; replace if the dual interface is glazed, torn, or out of round.
3" (76 mm) — Dual Adapter Backer Pad — DAS35/8PD
| Part No. | DAS35/8PD |
| UPC | 749173472282 |
| Size | 3" (76 mm) |
| Type | Dual Adapter Backer Pad |
| Thread | 5/8"-11 female |
| Max RPM | 6,000 RPM |
| Recommended For | Drives 3" Turboshine rigid discs and Alpha Buff pads |
| Packaged Weight | 0.15 oz lbs |
| Property | Detail |
|---|---|
| System | Alpha® Turboshine |
| Adapter Type | Dual Adapter (rigid disc + buff pad compatible) |
| Outer Diameter | 3 in (76 mm) |
| Spindle Thread | 5/8"-11 female |
| Maximum RPM | 6,000 |
| Recommended Polisher | Alpha® VSP-320 Variable Speed Polisher |
| Compatible Discs | 3" Turboshine rigid polishing discs (100–3000 grit), Alpha® Black & White Buff pads |
| Country of Origin | Japan |
No frequently-asked questions are currently published for this product. Contact us at e-commerce@dynamicstonetools.com.
Alpha Turboshine — System Demonstration
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.