Tenax Hydrex is a penetrating, natural-effect impregnating sealer that guards natural and engineered stone against water- and oil-based stains without changing the stone's color. It seals micro-porosities while letting the stone breathe, and is suitable for both indoor and outdoor surfaces.
| Property | Detail |
|---|---|
| Brand | Tenax |
| Product Type | Penetrating (impregnating) sealer |
| Effect | Natural — does not change the color of the stone |
| Protection | Waterproof and oil-proof; stain-resistant |
| Coverage | ~215–323 sq ft (20–30 m²) per quart, depending on porosity |
| Surfaces | Granite, marble, and engineered stone |
| Use | Indoor and outdoor |
| Breathable | Yes |
| Cure | Wait 24 hours before walking on sealed floors |
On clean, completely dry stone, spread evenly with a clean sponge or cloth until the surface stops absorbing, then buff off excess immediately with a dry cloth; repeat after 10–15 minutes if needed. For floors, wait 24 hours before walking on the surface. Note: Hydrex does not protect marble from etching by acids such as wine, citrus, or tomato.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
