The Alpha® Silencer III is a technologically advanced bridge saw blade engineered specifically for cutting marble on bridge and table saws. Its uniquely laminated core — two hardened steel sheets with a thin copper sheet sandwiched between them — absorbs sound waves rather than reflecting them, dramatically reducing noise while delivering fast, chip-free cuts. Available in 16" and 18" diameters with a standard 60mm arbor (50mm adapter included), the Silencer III for Marble combines superior cost performance, quiet operation and a free re-tipping service for the life of the blade.
| Part No. | Size | Thickness | Max RPM | Arbor | Segment Height | Recommended For | UPC |
|---|---|---|---|---|---|---|---|
| SLW16S2M | 16" | 3.6mm | 3,820 RPM | 60mm (with 50mm adapter) | 5/16" (8mm) | General Purpose Marble | 749173461019 |
| SLW18S2M | 18" | 4.4mm | 3,395 RPM | 60mm (with 50mm adapter) | 5/16" (8mm) | General Purpose Marble | 749173461026 |
| Part No. | SLW16S2M |
| UPC | 749173461019 |
| Size | 16" |
| Type | Bridge Saw Blade for Marble |
| Thread | 60mm (with 50mm adapter) |
| Max RPM | 3,820 RPM |
| Recommended For | General Purpose Marble |
| Country of Origin | Italy |
| Property | Detail |
|---|---|
| Application | Wet cutting marble on bridge and table saws |
| Core Construction | Two hardened steel sheets with a thin copper sheet laminated between |
| Segment Height | 5/16" (8mm) |
| Cutting Width | 3mm |
| Arbor | 60mm with included 50mm adapter |
| Cutting Method | Wet only — continuous water required |
| Available Sizes | 16" and 18" |
| Re-Tipping | Free re-tipping service for the life of the blade |
| Country of Origin | Italy |
It is engineered specifically for general-purpose marble. Cutting granite or other abrasive stone with this blade sacrifices blade life and cutting performance — use the appropriate Silencer III variant for those materials.
The Silencer III for Marble is available in 16" (SLW16S2M) and 18" (SLW18S2M) diameters.
The blade is equipped with a 60mm arbor and ships with a 50mm adapter for common bridge saw spindles.
No. Wet cutting diamond blades must be used with continuous water to prevent excessive heat buildup that damages segments and the core. Always supply water to both sides of the blade.
The core is laminated from two hardened steel sheets with a thin copper sheet between them. The copper layer absorbs sound waves rather than reflecting them, which significantly reduces operating noise compared with solid-steel-core blades.
Match the saw speed to the blade size: SLW16S2M is rated 3,820 RPM max; SLW18S2M is rated 3,395 RPM max. Never exceed the blade rating.
Yes. Alpha® offers free re-tipping service for the life of the blade. When segments wear down, return the blade for re-tipping rather than discarding it.
No product-specific videos are currently available from the manufacturer or DST.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.
