İçereği Atla
  1. Tüm ürünler
  2. Blades
  3. Bridge Saw Blades
  4. Alpha 16" Silencer III Premium Bridge Saw Blade for Marble
  5. Bridge Saw Blades
Fiyat Listesi: General Price List (USD) Fiyat Listesi
Fiyat Listesi: General Price List (USD) Fiyat Listesi

Alpha 16" Silencer III Premium Bridge Saw Blade for Marble

(0 incele)
  • Specialty Blade Designed for Marble for Bridge or Table Saws
  • Fast, Chip-Free Cutting
  • Superior Cost Performance with Reduced Noise Levels
  • Uniquely Designed Core Is Made of Two Hardened Steel Sheets with A Thin Copper Sheet Laminated Between Them
  • Equipped with A 60mm Arbor and Comes with A 50mm Adapter
$ 426,02 $ 426,02
$ 426,02

Terms and Conditions
Shipping: 2-3 Business Days
Bize Ulaşın
Belgeler
Alpha Recommended Peripheral Speeds Sheet.pdf Alpha Cutting Systems Overview Sheet.pdf Alpha Helpful Hints for Silencer III.pdf Alpha How to Use Silencer III for Marble.pdf Alpha Silencer III Flyer.pdf

Alpha® Silencer III Premium Bridge Saw Blade for Marble

The Alpha® Silencer III is a technologically advanced bridge saw blade engineered specifically for cutting marble on bridge and table saws. Its uniquely laminated core — two hardened steel sheets with a thin copper sheet sandwiched between them — absorbs sound waves rather than reflecting them, dramatically reducing noise while delivering fast, chip-free cuts. Available in 16" and 18" diameters with a standard 60mm arbor (50mm adapter included), the Silencer III for Marble combines superior cost performance, quiet operation and a free re-tipping service for the life of the blade.

Features

  • Specialty bridge saw blade engineered specifically for marble
  • Fast, chip-free cutting on bridge and table saws
  • Reduced noise levels — copper-laminated core absorbs sound waves
  • Two-layer hardened steel core with thin copper sheet laminated between
  • 60mm arbor with included 50mm adapter for common bridge saw spindles
  • 5/16" (8mm) segment height for long blade life
  • Available in 16" and 18" diameters
  • Free re-tipping service for the life of the blade
Part No. Size Thickness Max RPM Arbor Segment Height Recommended For UPC
SLW16S2M 16" 3.6mm 3,820 RPM 60mm (with 50mm adapter) 5/16" (8mm) General Purpose Marble 749173461019
SLW18S2M 18" 4.4mm 3,395 RPM 60mm (with 50mm adapter) 5/16" (8mm) General Purpose Marble 749173461026
  1. Confirm spindle size and install the blade on a 60mm arbor (use the included 50mm adapter if required).
  2. Mount the blade so that the indicator arrows point in the same direction the spindle turns.
  3. Verify the saw RPM does not exceed the blade rating (16" — 3,820 RPM max; 18" — 3,395 RPM max).
  4. Use the Silencer III for marble only; do not cut granite or other highly abrasive stone, which sacrifices blade life and cutting performance.
  5. Run wet at all times — supply continuous water to both sides of the blade to prevent heat buildup and excessive segment wear.
  6. Feed at a steady traverse speed; refer to the Alpha® Peripheral-Traverse-Speed Chart for the optimum rate at your blade size and spindle RPM.
  7. When segments wear down, send the blade back to Alpha® for free re-tipping service rather than discarding it.
16" — Bridge Saw Blade for Marble — SLW16S2M
Part No. SLW16S2M
UPC 749173461019
Size 16"
Type Bridge Saw Blade for Marble
Thread 60mm (with 50mm adapter)
Max RPM 3,820 RPM
Recommended For General Purpose Marble
Country of Origin Italy
Property Detail
Application Wet cutting marble on bridge and table saws
Core Construction Two hardened steel sheets with a thin copper sheet laminated between
Segment Height 5/16" (8mm)
Cutting Width 3mm
Arbor 60mm with included 50mm adapter
Cutting Method Wet only — continuous water required
Available Sizes 16" and 18"
Re-Tipping Free re-tipping service for the life of the blade
Country of Origin Italy
What materials is the Silencer III for Marble designed to cut?

It is engineered specifically for general-purpose marble. Cutting granite or other abrasive stone with this blade sacrifices blade life and cutting performance — use the appropriate Silencer III variant for those materials.

What sizes are available?

The Silencer III for Marble is available in 16" (SLW16S2M) and 18" (SLW18S2M) diameters.

What arbor does it use?

The blade is equipped with a 60mm arbor and ships with a 50mm adapter for common bridge saw spindles.

Can the Silencer III be used dry?

No. Wet cutting diamond blades must be used with continuous water to prevent excessive heat buildup that damages segments and the core. Always supply water to both sides of the blade.

What makes the Silencer III quieter than other blades?

The core is laminated from two hardened steel sheets with a thin copper sheet between them. The copper layer absorbs sound waves rather than reflecting them, which significantly reduces operating noise compared with solid-steel-core blades.

What is the maximum operating RPM?

Match the saw speed to the blade size: SLW16S2M is rated 3,820 RPM max; SLW18S2M is rated 3,395 RPM max. Never exceed the blade rating.

Does Alpha re-tip worn blades?

Yes. Alpha® offers free re-tipping service for the life of the blade. When segments wear down, return the blade for re-tipping rather than discarding it.

No product-specific videos are currently available from the manufacturer or DST.

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.