$ 27.78
$ 27.78
$ 27.78
Akemi Pro Scrub Concentrated Cleaner (500 mL)
AKEMI® Pro Scrub is a liquid, slightly alkaline, abrasive cleaning agent built on the finest abrasives, surfactants, and auxiliary agents. It is engineered to lift the stubborn soiling that ordinary cleaners leave behind — dried food residues, encrusted dirt, light limescale, and metal abrasion marks — from ground, polished, satin, or brushed natural and artificial stone. Free of microplastic and formulated with biodegradable surfactants, Pro Scrub is a workhorse for kitchen worktops, tables, window sills, shelves, and showers, and can even be used on stainless steel.
- Fine-abrasive action — removes dried food residues, encrusted dirt, light limescale and metal abrasion
- Slightly alkaline (pH 10) — effective yet gentler than acidic descalers
- Free of microplastic — with biodegradable surfactants
- Water-reactivatable — if it dries during use, simply re-wet to keep working
- Versatile — for granite, limestone, marble, ceramics and quartz, plus stainless steel
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Liquid abrasive cleaning agent (slightly alkaline) |
| Chemical Basis | Fine abrasives, surfactants and auxiliary agents; free of microplastic; biodegradable surfactants |
| Consistency | Liquid (shake well before use) |
| Color | Milky white |
| pH Value | 10 (slightly alkaline) |
| Density | 1.4 g/cm³ (11.7 lb/gal) |
| Rinse / Clean-off | Clear water |
| Storage / Shelf Life | At least 24 months stored dry and cool at 41–77°F (5–25°C) in the closed original container |
| Available Sizes | 500 mL (16.9 fl oz) |
- Removes dried food residues and other encrusted dirt, light limescale deposits, and metal abrasion marks
- Fine-abrasive formula works on ground, polished, satin or brushed natural and artificial stone
- Slightly alkaline (pH 10) — free of microplastic, with biodegradable surfactants
- Dried product can be reactivated simply by adding water, so nothing is wasted mid-job
- Also suitable for stainless-steel surfaces
Recommended for:
- Tables, worktops, window sills, shelves, showers and similar surfaces
- Ground, polished, satin or brushed natural and artificial stone — e.g. granite, limestone, marble, ceramics and composite quartz
- Stainless-steel surfaces
Use with care on: shiny, scratch-sensitive surfaces — too much pressure can cause a loss of gloss, so work with light pressure and test first.
- Shake well before use.
- Remove heavy dirt or encrustation mechanically first (e.g. by scraping); sweep or vacuum up loose particles.
- Apply Pro Scrub to the slightly damp surface and work it in with a cloth under light pressure until the dirt is removed. Dried product can be reactivated with water.
- Wipe off any excess product and loosened dirt with paper or a cloth.
- Clean the surface with clear water.
- On shiny, scratch-sensitive surfaces use light pressure — excessive pressure can dull the gloss.
- Pro Scrub strips old layers of care product; treating only spots can leave uneven color intensity, so clean the entire surface where needed.
- Abrasive particles may settle into porous or rough surfaces — remove them with AKEMI® Stone Cleaner or Natural Stone Basic Cleaner and a fine brush.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures and may vary with jobsite conditions.