Akemi Rust Remover Marble
Rust Remover Marble is a ready for use, slightly alkaline cleaning agent, easily biodegradable.
For the removal of superficial rust stains produced by ferrous substances or objects (fertilizers, tools, iron parts etc.) on natural and artificial stone or concrete ashlar being sensitive to solvents. Ideal for marble or lime stone surfaces already laid or ready to be laid. Can be applied punctually on stone surfaces because no changes appear.
Surface: Rough, Fine-ground, Ground, Satinated, Bush-hammered, Sand blasted, Antique, Sawn, Raugh sawn, Rough, Polished, Flamed
Chemical basis: Water-based
Method of application: Scrubber, Brush, Manual
PH value: PH neutral
Cleaning: Removal of stains & special cleaning
Material: Natural stone, Marble and limestone, Granite, Terrazzo, Slate, Concrete ashlar, Cotto, Stones sensitive to acides
Area of application: Kitchen, Bathroom & sanitary, Table & window sill, Flooring & stairs, Garden & terrace, Gravestone & monument, Facade, Wall
Concentration: Ready-to-use
Akemi Rust Remover Marble — a ready-to-use, slightly alkaline cleaning agent for removing superficial rust stains from marble, limestone and other acid-sensitive stones. Water-based and easily biodegradable, it converts rust so it can be rinsed away without altering the surface appearance.
Recommended for: polished marble and limestone; also suitable for other natural and artificial stones or concrete ashlar sensitive to acids — e.g., countertops, stairs, window sills, terraces, facades (interior & exterior).
Not sure if this is the right product for your job?
Try our free Adhesive & Sealer Guide — answer a few questions about your project (interior/exterior, application, material) and we'll recommend the best product from 600+ verified stone chemicals.
Find My Product →