$ 139.25
$ 139.25
$ 97.23
-
Size
Diamax Cyclone S Thin Wall Core Bit for Granite and Marble Drilling
The Cyclone CDBCTW112 is part of Diamax's Cyclone series tools deliver high-output performance for professional stone fabricators working granite, engineered stone, and quartz. This product is engineered to drill clean-walled holes in stone slabs for faucets, fixtures, and through-bolts.
Manufacturer overview: 1 1/2" Cyclone S Thin Wall Core Bit 5/8-11 Thread.
Features
- Diamax Cyclone series tooling
- Manufacturer model code: CDBCTW112
- Engineered for professional stone-fabrication workflows
- Designed for core bits applications
- Use only on equipment rated for the tool's operating speed and cooling method (wet vs. dry)
| Property | Detail |
|---|---|
| Brand | Diamax |
| Family | Cyclone |
| Model / Part Number | CDBCTW112 |
| Vendor Category | Core Drill Bits |
| Product Type | Core Bits |
- Mount the bit in a drill with the correct arbor and a guide jig if available.
- Start the cut at a slight angle to seat the bit, then bring it vertical.
- Use water cooling for wet bits; never run wet bits dry.
- Apply even, light pressure — let the diamond crown remove material.
- Rinse the tool with clean water after wet use to flush slurry from the matrix.
- Air-dry before storage; do not store wet tools in sealed containers.
- Inspect the tool for cracks, chipping, or excessive wear before every shift.
- Do not exceed the maximum RPM printed on the tool body.
- Replace the tool when cut rate drops noticeably or visible damage appears.
Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator. Follow OSHA silica-exposure rules and the tool manufacturer's operating instructions when fabricating stone.
Specifications
| Size | 1-1/2 inch, 1-1/4 inch, 1-3/8 inch |