$ 350.21
$ 350.21
$ 130.87
-
Position
-
Width
Diamax Hurricane Cove Dupont Router Bit Shape O for Granite Edges
The Hurricane RHCD30F is part of Diamax's Hurricane line is engineered for production-grade fabrication of granite, marble, and engineered stone surfaces. This product is shape decorative profiles on stone slab edges using CNC routers or hand-held routing systems.
Manufacturer overview: 30mm Hurricane Cove/Dupont Router Pos. 3 (Shape O).
Features
- Diamax Hurricane series tooling
- Manufacturer model code: RHCD30F
- Engineered for professional stone-fabrication workflows
- Designed for router bits applications
- Use only on equipment rated for the tool's operating speed and cooling method (wet vs. dry)
| Property | Detail |
|---|---|
| Brand | Diamax |
| Family | Hurricane |
| Model / Part Number | RHCD30F |
| Vendor Category | Grinders/Shapers |
| Product Type | Router Bits |
- Mount the bit in the router or CNC spindle with the correct collet.
- Use water cooling at the cut; profile bits run hot without it.
- Match the spindle RPM to the bit diameter as printed on the bit body.
- Make multiple passes for deep profiles rather than one heavy cut.
- Rinse the tool with clean water after wet use to flush slurry from the matrix.
- Air-dry before storage; do not store wet tools in sealed containers.
- Inspect the tool for cracks, chipping, or excessive wear before every shift.
- Do not exceed the maximum RPM printed on the tool body.
- Replace the tool when cut rate drops noticeably or visible damage appears.
Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator. Follow OSHA silica-exposure rules and the tool manufacturer's operating instructions when fabricating stone.
Specifications
| Position | Pos. 3, Pos. 0 |
| Width | 20mm, 30mm |