$ 5.745,00
$ 5.745,00
$ 5.745,00
Aardwolf AVLB4 Four-Pad Battery Vacuum Lifter
The Aardwolf AVLB4 is a four-pad battery-powered vacuum lifter for handling oversize stone slabs and glass panels. Cordless operation removes the air hose and compressor from the lifting workflow. Built for stone fabricators and glass installers moving large slabs in shops and on jobsites.
Features
- Four suction pads for balanced lifting of oversize slabs
- Cordless lithium-ion battery operation — no air hose required
- Vacuum reserve tank holds suction during pump cycle pauses
- Audible low-vacuum alarm warns the operator before lift-off risk
- Vacuum gauge for visual confirmation of seal pressure
- Spreader bar lift eye for crane, gantry, or forklift jib
- Built to AS 4991 lifting equipment standard
- Charge the battery fully and confirm the gauge zeros before each shift.
- Wipe the slab face clean of dust, water, and slurry.
- Center the four pads on the slab and press to seat the seals.
- Switch on the pump and wait until the gauge reads in the safe zone.
- Lift slowly with a crane, gantry, or forklift jib.
- Wear gloves, steel-toe boots, and a hard hat throughout the lift.
| Property | Detail |
|---|---|
| Brand | Aardwolf |
| Part Number | AVLB4 |
| Type | Battery vacuum lifter |
| Number of Pads | 4 |
| Power Source | Cordless lithium-ion battery |
| Safety Features | Vacuum reserve tank, audible alarm, gauge |
| Standard | AS 4991 |
Granite, marble, quartzite, engineered quartz, porcelain slabs, and flat glass panels. Best on smooth, clean, non-porous surfaces.
Always wear appropriate PPE. Follow local safety regulations when using power tools or chemical products.