İçereği Atla
  1. Tüm ürünler
  2. Core Bits
  3. Dry Core Bits
  4. Cyclone Ultra Core Drill Bit, 5/8-11 Thread
  5. Dry Core Bits
Fiyat Listesi: General Price List (USD) Fiyat Listesi
Fiyat Listesi: General Price List (USD) Fiyat Listesi

Cyclone Ultra Core Drill Bit, 5/8-11 Thread

(0 incele)

• Specific grit & bond composition provides a fast clean hole through porcelain & other ultra compact material

• Featuring thin beveled segments for ease of entry into material

• Shortened overall length for added control

• Wet or dry use

$ 235,77 $ 235,77
$ 115,76

  • Diameter
Terms and Conditions
Shipping: 2-3 Business Days
Bize Ulaşın
Belgeler
Cyclone Ultra Core Bit Flyer.pdf

Diamax Cyclone Ultra Wet Core Bits for Granite and Marble Drilling

The Cyclone CUDB100 is part of Diamax's Cyclone series tools deliver high-output performance for professional stone fabricators working granite, engineered stone, and quartz. This product is designed for dry drilling of stone, capable of producing clean holes without water cooling.

Manufacturer overview: 1" Cyclone Ultra Dry Thin Wall Core Bit 5/8-11".

Features

  • Diamax Cyclone series tooling
  • Manufacturer model code: CUDB100
  • Engineered for professional stone-fabrication workflows
  • Designed for dry core bits applications
  • Use only on equipment rated for the tool's operating speed and cooling method (wet vs. dry)
PropertyDetail
BrandDiamax
FamilyCyclone
Model / Part NumberCUDB100
Vendor CategoryCore Drill Bits
Product TypeDry Core Bits
  1. Mount the bit in a drill with the correct arbor.
  2. Connect dust extraction to the work zone.
  3. Start the cut with the bit guided to prevent walking.
  4. Run at the bit's rated RPM with light pressure.
  • Rinse the tool with clean water after wet use to flush slurry from the matrix.
  • Air-dry before storage; do not store wet tools in sealed containers.
  • Inspect the tool for cracks, chipping, or excessive wear before every shift.
  • Do not exceed the maximum RPM printed on the tool body.
  • Replace the tool when cut rate drops noticeably or visible damage appears.

Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator. Follow OSHA silica-exposure rules and the tool manufacturer's operating instructions when fabricating stone.

Özellikler

Diameter 5/16", 5/8", 1", 1-1/4", 2", 3", 3-1/2", 4"