Dry-Treat STAIN-PROOF Premium Impregnating Sealer (Original) — Invisible, Breathable Stone & Grout Sealer, Quart
-
Marka
| Marka: Dry-Treat |
STAIN-PROOF Premium Impregnating Sealer, formerly STAIN-PROOF Original, is an impregnating, invisible and breathable sealer that gives premium long-term protection to natural stone, tiles, pavers, concrete, brick and grout against water- and oil-based stains and damage from water and dissolved salts. Its deep-penetrating, permanent bonding chemistry does not change the natural appearance of the surface, and treated indoor and outdoor surfaces become easier to clean and stay looking good longer.
| Property | Detail |
|---|---|
| Brand | Dry-Treat / STAIN-PROOF |
| Product | Premium Impregnating Sealer (formerly Original) |
| Size | 1 Quart (32 fl oz) |
| Vendor / Mfr Number | 110513 |
| Base | Solvent-based impregnator |
| Coverage | ~1 quart per 20–250 sq ft (1 L per 2–25 m2), depending on surface absorption |
| VOC | < 650 g/L (calculated); VOC-compliant in containers of 1 liter or less |
| Coats | 2 coats minimum (up to 4 light coats on vertical surfaces) |
| Dry time between coats | At least 10 min (porous) / ~15 min (dense/polished) |
| Cure time | Usable after 24 hours; full cure up to 3–4 weeks |
| Application temp | Surface 40–95 F (5–35 C); avoid moisture for 6 hours after |
| Application method | Low-pressure sprayer or microfiber (porous); lamb's wool applicator or cloth (polished) |
| Color enhancement | None — retains natural appearance |
| Surfaces | Natural stone, tiles, pavers, concrete, brick, grout |
| Warranty | Up to 15-year performance warranty (Accredited Applicator + maintenance) |
| Weight | 1.88 lb |
Seal natural stone, tiles, pavers, concrete, brick and grout on floors, walls, countertops, showers, patios, pool surrounds and building facades. Apply two even coats with a low-pressure sprayer, microfiber pad or lamb's wool applicator when the surface is 40–95 F, keeping the surface wet between coats and wiping off residue before it dries. Avoid moisture contact for 6 hours; the surface may be used after 24 hours with full cure over 3–4 weeks.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.