$ 33,57
$ 33,57
$ 33,57
-
Marka
| Marka: Tenax |
Tenax Glaxs Easy Tube Part B — 300 g Hardener for Glaxs Crystal-Clear Epoxy
Glaxs Easy Tube Part B is the hardener component of Tenax Glaxs crystal-clear epoxy. Supplied in a 300 g (10.6 oz) dosing tube, it mixes 1:1 with Glaxs Part A resin to produce a transparent, zero-yellowing, VOC-free bond that polishes to match stone, marble, granite and ceramic.
| Property | Detail |
|---|---|
| Brand | Tenax |
| Product | Glaxs Easy Tube — two-part epoxy |
| This item | Part B — hardener, 300 g (10.6 oz) tube (mix 1:1 with Part A) |
| Chemistry | Two-component epoxy |
| Mix ratio (A : B) | 1:1 (glue : hardener) |
| Gel time (77°F / 25°C, bulk) | 6–8 min |
| Tack-free time (77°F / 25°C, bulk) | ~100 min |
| Minimum application temperature | 50°F (10°C) |
| Service temperature (after cure) | -13°F to 140°F (-25°C to 60°C) |
| Color / finish | Crystal-clear, transparent, zero yellowing; glossy, polishable |
| Other properties | No shrinkage · VOC-free · excellent adhesion |
| Use | Indoor & outdoor |
- Crystal-clear formula with zero yellowing over time — stays transparent for invisible seams.
- Excellent adhesion with no shrinkage; the cured bond is glossy and polishes to match the stone.
- VOC-free, two-component epoxy mixed 1:1 from convenient dosing tubes for easy, accurate mixing.
- Fast 6–8 min gel time; tack-free in about 100 minutes at 77°F.
- Suitable for indoor and outdoor use on stone, marble, granite, ceramic and mixed materials.
Bonding and seam-setting of stone, marble, granite and ceramic, including mixed combinations (marble-to-marble, marble-to-granite, stone-to-ceramic). Ideal where a clear, non-yellowing, polishable bond line is required, indoors or outdoors.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.