The Alpha® EZ Thin Cutter Starter Kit is a complete manual score-and-snap solution for thin porcelain panels and large-format slim tile such as SlimLite™ (Daltile®) and Laminam® (Crossville®). One box delivers the 24" T-Cutter (KEC-600) for fast, precision straight cuts, the Slimline Oil Cutter (KOC305B) for free-hand scoring, the EZ Running Plier (KOC512P) for clean breaks on 5–12 mm material, and an 8 oz bottle of EZ Cutter Oil (KOC1000) to keep the tungsten-carbide score wheels gliding. No power, no dust, no water — just controlled scoring and a clean snap.
| Part No. | Includes | Packaged Weight | UPC |
|---|---|---|---|
| 5480-1700 | Includes 24" T-Cutter (KEC-600), Slimline Oil Cutter (KOC305B), Running Plier (KOC512P) & EZ Cutter Oil (KOC1000) | 12.55 lbs | 749173560095 |
| Part No. | 5480-1700 |
| UPC | 749173560095 |
| Type | Alpha EZ Thin Cutter Starter Kit |
| Max RPM | N/A (manual) |
| Packaged Weight | 12.55 lbs |
| Commodity Code | See Individuals |
| Country of Origin | See Individuals |
| Property | Detail |
|---|---|
| Type | Manual score-and-snap cutter kit |
| Score Wheel Material | Tungsten carbide, 138° angle |
| Max Material Thickness | 3/8" (10 mm) |
| Min Material Thickness | 1/8" (3 mm) typical |
| Max Scoring Width (T-Cutter KEC-600) | 25-1/2" (648 mm) |
| Running Plier Capacity | 5–12 mm material thickness |
| Recommended For | Smooth-surface porcelain panels & slim tile (SlimLite™, Laminam®) |
| Not Recommended For | Textured surfaces, natural stone, glass |
| Oil Included | 8 oz (237 ml) EZ Cutter Oil (KOC1000) |
| Power Required | None — manual operation |
One 24" T-Cutter (KEC-600), one Slimline Oil Cutter (KOC305B), one Running Plier (KOC512P) and one 8 oz EZ Cutter Oil (KOC1000) — everything needed to score and snap thin porcelain.
Smooth-surface porcelain panels and slim tile such as Daltile® SlimLite™ and Crossville® Laminam®. It will not work on textured panels, natural stone or glass.
Up to 3/8" (10 mm) effective thickness. Minimum is typically 1/8" (3 mm).
The 24" T-Cutter (KEC-600) included in the kit scores up to 25-1/2". For panels up to 60" step up to the KEC-1500 (60" T-Cutter, sold separately).
No. Textured surfaces prevent the wheel from producing a continuous score. Use the Alpha Spike Ruler with a power tool such as the Ecocutter (ECC-125), AWS-110 stone cutter or Ecoguard C with a Katana / Laminam blade.
It is highly recommended — the oil keeps the tungsten-carbide wheel cutting smoothly and extends its life. Kerosene, mineral oil or sewing machine oil are acceptable substitutes if needed.
Place the plier on the score line with the red indicator aligned to the score, then apply a gentle, even squeeze. The break should follow the score with very little force.
No — this is a straight score-and-snap kit. For 45° miters use the Alpha Beveling Auxiliary Base; for shower-knob cutouts use the Alpha Contour Blade for Porcelain.
Tools for Thin Porcelain
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.
