$ 158,69
$ 158,69
$ 158,69
-
Marka
Aardwolf OHVC Oval Hand vacuum cup Lifter
The Aardwolf Oval Hand Vacuum Cup Lifter is a vacuum lifter for handling smooth, non-porous material. It is rated at 220 lb (100 kg), a 15" x 3.1" (380 x 80 mm) oval pad. Built from aluminum with rust-resistant parts. Unit weight 2.9 lb (1.3 kg).
Features
- 220 lb (100 kg) working load limit
- 15" x 3.1" (380 x 80 mm) oval vacuum pad
- Weighs 2.9 lb (1.3 kg)
- Built from Aluminum with rust-resistant parts
| Property | Detail |
|---|---|
| Brand | Aardwolf |
| Working Load Limit | 220 lb (100 kg) |
| Pad Size | 15" x 3.1" (380 x 80 mm) oval |
| Net Weight | 2.9 lb (1.3 kg) |
| Gross Weight | 4.2 lb (1.9 kg) |
| Material | Aluminum with rust-resistant parts |
| Vacuum Generation | Manual hand pump; three pumps produce full vacuum |
| Gauge | Integrated vacuum gauge |
| Surface Type | Smooth non-porous flat or curved surfaces (glass, stone, steel pipe) |
| Packaging Dimensions | 17.7" x 5.9" x 4.3" (450 x 150 x 110 mm) |
| Included | Protective carrying case |
| Country of Origin | Vietnam |
- Inspect the vacuum pad seal for cuts, grit, or compression set before each shift.
- Charge or connect the pump power supply and confirm it primes.
- Seat the pad flat on clean, sound, non-porous material with no chips or seams under the seal.
- Draw vacuum and wait for the gauge to reach the safe zone before taking any load.
- Lift slowly and keep the load low; never stand or pass under a suspended load. Never exceed the rated 220 lb (100 kg).
- Set the material down fully, then release vacuum and vent the pad.
Vacuum Cup Oval with Gauge | Aardwolf
Özellikler
| Marka | Aardwolf |