Built with the latest technology for Dekton and other UltraCompact surfaces.
Recommended for: UltraCompact Surfaces. Wet use only.
| Property | Detail |
|---|---|
| Material | UltraCompact Surfaces |
| Dry / Wet Use | Wet use only. |
| Spindle Speed | 14": 2,000-2,200 RPM; 16": 1,800-2,000 RPM |
| Feed Rate (Straight Cut) | 14" and 16" blades (23436-02001, 23436-02002): 32-40 IPM. The 8" blade (23436-02003) is rated "Adjustable" by the distributor; no fixed feed rate is published for it. |
| Feed Rate (Miter Cut) | 14" and 16" blades (23436-02001, 23436-02002): 16 IPM. The 8" blade (23436-02003) is rated "Adjustable" by the distributor; no fixed feed rate is published for it. |
| Core | Solid non-silent steel core |
| Approval | Approved by Cosentino for use on Dekton (KeramiCUT) |
| 8" Blade Speed | Max 7,500 RPM |
| Arbor | 8": 7/8" – 5/8"; 14" and 16": 60/50 mm |
Always wear appropriate PPE (ANSI Z87 eye protection, hearing protection and respiratory protection as required). Observe the tool's maximum speed rating and follow local safety regulations. California Proposition 65 WARNING: this product can expose you to chemicals, including nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
