$ 32,81
$ 32,81
$ 32,81
-
Step
Diamax Cyclone Trifecto 3 Step Polishing System
The Cyclone P3D41 is part of Diamax's Cyclone series tools deliver high-output performance for professional stone fabricators working granite, engineered stone, and quartz. This product is engineered for either wet or dry polishing of stone surfaces.
Manufacturer overview: 4" Trifecto 3-Step Wet Pad #1.
Features
- Diamax Cyclone series tooling
- Manufacturer model code: P3D41
- Engineered for professional stone-fabrication workflows
- Designed for wet & dry polishing pads applications
- Use only on equipment rated for the tool's operating speed and cooling method (wet vs. dry)
| Property | Detail |
|---|---|
| Brand | Diamax |
| Family | Cyclone |
| Model / Part Number | P3D41 |
| Vendor Category | Polisher Wet |
| Product Type | Wet & Dry Polishing Pads |
- Mount the pad on a backer matched to its diameter.
- When polishing wet, use continuous water feed; when dry, use dust extraction.
- Match polisher RPM to the pad diameter spec.
- Step through the full grit sequence for a defect-free finish.
- Rinse the tool with clean water after wet use to flush slurry from the matrix.
- Air-dry before storage; do not store wet tools in sealed containers.
- Inspect the tool for cracks, chipping, or excessive wear before every shift.
- Do not exceed the maximum RPM printed on the tool body.
- Replace the tool when cut rate drops noticeably or visible damage appears.
Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator. Follow OSHA silica-exposure rules and the tool manufacturer's operating instructions when fabricating stone.
Özellikler
| Step | 1, 2, 3 |