$ 39,60
$ 39,60
$ 152,85
-
Marka
-
Size
| Marka: Akemi |
Akemi Stone Sealer Matte Finish
AKEMI® Stone Sealer matt finish is a professional, solvent-containing sealer made from superior acrylic resins. It penetrates porous and absorbent stone to seal the surface, deliver a good colour intensification, and make the stone noticeably easier to clean — all while keeping a natural, non-glossy matt look. The cured film is weather-resistant and non-yellowing, making it a reliable interior sealer for marble, granite, slate, sandstone, quartzite, terrazzo, and fair-faced concrete.
- Matt, natural finish — seals without adding gloss
- Colour intensification — enriches the stone’s natural tone
- Easier to clean — reduces absorbency of porous stone
- Non-yellowing — superior acrylic resin base
- Fast drying — ready in as little as 10 minutes
This product is offered in the following options — select your choice above:
| Size | Item Reference |
|---|---|
| 1 L | CARE.10840 |
| 5 L | CARE.10841 |
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Solvent-based penetrating stone sealer |
| Chemical Basis | Superior acrylic resins, solvent-containing |
| Finish | Matt (natural, non-glossy) |
| Color | Colourless / transparent |
| Density | Approx. 0.87 g/cm³ (7.3 lb/gal) |
| Coverage | Approx. 407–814 ft²/gal (10–20 m²/liter) |
| Drying Time | 10–60 minutes, depending on temperature |
| Number of Coats | 1 coat; apply twice on very absorbent surfaces |
| Tool Cleaner | AKEMI® Nitro-Dilution |
| Weather Resistance | Weather-resistant and non-yellowing (outdoor durability limited) |
| Shelf Life | At least 24 months, sealed, stored at 41–77°F (5–25°C) |
| Available Sizes | 1 liter (33.8 fl oz) · 5 liter (1.3 gal) |
| Manufacturer Part Number | CARE.10840, CARE.10841 |
- Solvent-based sealer made from superior acrylic resins
- Weather-resistant and non-yellowing
- Gives treated surfaces a good colour intensification
- Makes porous, absorbent stone easier to clean
- Matt finish preserves the natural, non-glossy look of the stone
- Fast drying — surface dries in 10 to 60 minutes depending on temperature
Recommended to seal porous and absorbent natural and artificial stone:
- Marble, granite, slate and slabs from Solnhofen
- Sandstone and quartzite
- Terrazzo and fair-faced concrete
Not suitable for: polished, fine-ground, glazed or damp surfaces; and burnt products such as cotto, clinker or stoneware. Outdoor durability is limited — AKEMI® recommends AKEMI® Colour Intensifier for exterior use instead.
- Clean the surface — it must be clean, completely dry, and free from all layers. Use the appropriate AKEMI® cleaner for the soiling, then rinse well with water. Allow the stone to dry completely (as a rule at least 1–2 days).
- Apply undiluted and evenly in a thin layer with a brush, paint roller, or spraying device. Avoid direct sunlight and humidity until dry.
- Allow the surface to dry for approximately 10 to 60 minutes, according to temperature.
- For very absorbent surfaces, apply a second time.
- Clean tools with AKEMI® Nitro-Dilution.
- For regular cleaning, AKEMI® Mild Stone Soap has shown the best results.
- Do not use on polished, fine-ground, glazed, or damp surfaces, nor on burnt products (cotto, clinker, stoneware).
- Protect objects in the working area that are sensitive to solvents (various synthetic materials, rubber, lacquered parts).
- Films of the sealer can be removed with AKEMI® Universal Dilution.
- Use a liquid-glove hand protector; empty the container completely for proper disposal.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures and may vary with jobsite conditions.