$ 21,45
$ 21,45
$ 21,45
-
Marka
Tenax Marble Rust & Etch Remover Kit — TeRust Poultice + TeEtch Compound for Stone
This Tenax kit combines TeRust rust-remover powder with TeEtch etch-remover compound to tackle two of the most common problems on stone: rust staining and acid etching. TeRust uses a chelate-based poultice to draw rust out of the stone, while TeEtch is a polishing compound that mechanically removes etch and water marks and re-polishes the surface.
| Property | Detail |
|---|---|
| Brand | Tenax |
| Product | Marble Rust & Etch Remover Kit (TeRust + TeEtch) |
| TeRust Chemistry | Chelate-based rust-stain poultice powder |
| TeRust Surfaces | Granite, marble, travertine, limestone, terrazzo, concrete, brick and sanded grout |
| TeEtch Removes | Etch marks, water marks, water rings, dull spots and light scratches |
| TeEtch Surfaces | Marble, travertine, limestone, alabaster and onyx (calcareous stone) |
- Two-stage kit — removes rust staining and repairs acid etching
- TeRust chelate poultice draws rust out of the stone
- TeEtch polishing compound mechanically removes etch and water marks and re-polishes
- Covers a wide range of natural stone and masonry surfaces
TeRust: mix the powder with water to a toothpaste consistency over the rust stain, cover with plastic wrap punched with several toothpick holes, and remove the poultice 24–48 hours after it dries. TeEtch: apply a spoonful over the etch or water mark and rub with a cloth for 2–3 minutes to mechanically remove the blemish and re-polish. Note: calcium-based stones may etch during rust removal and require re-polishing.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.