Tenax Sealer and Wax remover, is a detergent for wax removal and treatments. Restores surfaces. It removes application errors, layers of old treatments and waxes of all types. It is a product that allows you to remove from the surfaces the excess of Tenax treatments made previously. It is necessary in case of incorrect application.
The surface to be treated must be dry. The presence of water could result in uneven treatment. Check the effect on a sample or hidden area. Pour the product on the surface you want to remove the excess of Tenax Ager treatment from and wait for a few minutes. Remove vigorously manually or using a floor brush. Finally, clean the surface
The product will last at least 24 mouths in normal condition (between 5-30°C), kept away from source of heat, humidity and sun light. Close the package after usage. Protect the product against freezing temperatures
This is a chemical product. Please read the safety data sheet before usage.
The surface to be treated must be dry. The presence of water could result in uneven treatment. Check the effect on a sample or hidden area. Pour the product on the surface you want to remove the excess of Tenax Ager treatment from and wait for a few minutes. Remove vigorously manually or using a floor brush. Finally, clean the surface The product will last at least 24 mouths in normal condition (between 5-30°C), kept away from source of heat, humidity and sun light. Close the package after usage. Protect the product against freezing temperatures This is a chemical product. Please read the safety data sheet before usage..
| Brand | Tenax |
| Manufacturer | Tenax S.p.A. |
| Country of Origin | Italy |
Not sure if this is the right product for your job?
Try our free Adhesive & Sealer Guide — answer a few questions about your project (interior/exterior, application, material) and we'll recommend the best product from 600+ verified stone chemicals.
Find My Product →