WET ECO
WET LOOK SEALER
WHAT IT'S FOR
- Seals indoor and outdoor unpolished natural stone, terracotta.
- Gives the surface a wet-look, glossy finish.
- Protects surfaces from dirt and stains.
- Intensifies the color of unpolished natural stone.
- Ideal for use in kitchens, under barbeques, on driveways and in high traffic areas both indoors and outdoors.
ADVANTAGES
- ECO-FRIENDLY: WATER-BASED.
- WEATHER RESISTANT.
- IS NOT AFFECTED BY RESIDUAL HUMIDITY: CAN BE APPLIED 24-48 HOURS AFTER INITIAL CLEANING.
- VERY LOW VOC EMISSIONS: CONTRIBUTES TOWARDS LEED CREDITS.
IDEAL FOR
- UNPOLISHED NATURAL STONE, TERRACOTTA
CERTIFICATIONS

CERTIFIED INDOOR AIR COMFORT GOLD
Product with low VOC emissions which guarantees high indoor air quality
BEFORE AND AFTER


HOW TO USE IT
Ready to use, no dilution necessary. Shake before use.
Apply an even coat of WET ECO to clean, dry floors using a large, flat paintbrush, lambswool applicator or roller, rubbing into the grout joints.
Apply a second coat of the product 2-3 hours after the first coat following the same method. The surface may be used for normal foot traffic after 12 hours. Full cure and maximum sealer protection is achieved in 24 hours.

Path and Patio
WET gives to unpolished stones a fresh wet-look.

PLEASE NOTE
For surfaces with low absorbency (slate, Botticino or Carrara marble) we recommend diluting the product with water (1:1 product to water). Do not use on polished surfaces. Do not use on treated surfaces.
COVERAGE
1 QT (0.95 L)
- Unpolished natural stone, terracotta ›100-205 sq.ft. (9-19 m2)
- Coverage rates are indicative and per coat.
technical
sheet
safety
sheet
WET ECO - Wet Look Sealer
What it’s for:
WET ECO is designed to seal unpolished natural stone, unpolished agglomerates, and terracotta, both indoors and outdoors. It provides a wet-look, glossy finish while protecting surfaces from dirt and stains. It intensifies the color of unpolished natural stone and is perfect for areas like kitchens, driveways, under barbecues, and high traffic zones.
Advantages:
- Eco-friendly, water-based formula
- Weather resistant and ideal for high-traffic areas
- Can be applied 24-48 hours after initial cleaning, even with residual humidity
- Long-lasting protection: does not flake or yellow over time
- Makes cleaning easier and does not alter terracotta s frost resistance
- Bio-based content developed from organic raw materials
- Certified Indoor Air Comfort Gold: low VOC emissions, contributing to better indoor air quality and LEED credits
Ideal for:
Unpolished natural stone, unpolished agglomerates, and terracotta.
Not sure if this is the right product for your job?
Try our free Adhesive & Sealer Guide — answer a few questions about your project (interior/exterior, application, material) and we'll recommend the best product from 600+ verified stone chemicals.
Find My Product →