İçereği Atla

FILA SR95 — Liquid Organic Stain Remover for Stone, Porcelain & Ceramic

(0 incele)

STAIN REMOVER FOR NATURAL STONE AND PORCELAIN


WHAT IT'S FOR

Eliminates colored, organic stains: wine, coffee, soft drinks, tea and permanent marker.

Designed to remove stains on natural stone surfaces: marble, travertine and limestone.


ADVANTAGES

DOES NOT DAMAGE THE FINISH ON POLISHED NATURAL STONE.

IDEAL FOR LOW ABSORPTION TILE SUCH AS POLISHED AND TEXTURED PORCELAIN.

REMOVES DEEP SET STAINS WHERE OTHER STAIN REMOVERS ARE NOT EFFECTIVE.


IDEAL FOR

POLISHED AND MATTE PORCELAIN TILE, ALL NATURAL STONE, GLAZED CERAMIC TILE, CONCRETE



HOW TO USE IT

Ready to use, no dilution necessary. Shake well before use.


Completely cover the stain and let sit for 15 minutes, until it disappears.

Remove any residue with a sponge.Should stubborn stains remain on marble surfaces, remove the product before it dries completely and repeat the application.


PLEASE NOTE

The product bleaches fabrics.

11,70 11,70
11,70
  • Marka
Terms and Conditions
Marka: Fila

FILA SR95 — Liquid Organic Stain Remover for Stone, Porcelain & Ceramic

FILA SR95 is a ready-to-use stain remover that lifts ingrained coloured, organic stains where ordinary cleaners have no effect. Specially developed for natural stone, it can be used with confidence on polished finishes because it does not attack the surface, and it is equally effective on low-absorption porcelain and ceramic.

PropertyDetail
BrandFILA
Product TypeStain remover — ready to use
Suitable SurfacesPorcelain tile, natural stone & agglomerates, glazed ceramic tile, concrete
RemovesColoured organic stains: wine, coffee, soft drinks, tea, indelible marker
DilutionNone — ready to use
Dwell TimeAbout 15 minutes
Application Temperature41–86°F (5–30°C)
Storage Temperature32–86°F (0–30°C)
Size75 mL bottle
TDS RevisionREV. 00 — 09/03/2020
  • Removes ingrained stains where normal cleaners have no effect
  • Safe on polished natural stone — does not attack the finish
  • Ideal for low-absorption surfaces such as porcelain and textured single-fired tiles
  • No dilution required — ready to use straight from the bottle

Shake before use, then apply directly on the stain so it is fully covered. Leave for about 15 minutes and remove the residue with a sponge. For stubborn stains on marble, remove the product before it dries completely and repeat. Do not use together with acids and keep the area well ventilated. Caution: this product bleaches fabrics.

Wear appropriate PPE. Follow manufacturer instructions and safety regulations.