İçereği Atla
  1. Tüm ürünler
  2. Core Bits
  3. Wet Core Bits
  4. Weha Weramic Diamond Core Bit
  5. Wet Core Bits
Fiyat Listesi: General Price List (USD) Fiyat Listesi
Fiyat Listesi: General Price List (USD) Fiyat Listesi

Weha Weramic Diamond Core Bit

(0 incele)
$ 85,07 $ 85,07
$ 74,37
  • Marka
  • Size
Bize Ulaşın
Terms and Conditions
Size 1/4", 3/8", 1/2", 3/4", 1", 1-1/8", 1-3/8", 2", 2-1/4", 2-3/8", 2-1/2", 2-3/4", 3", 3-1/4", 3-1/2"
Marka Weha

Weha Weramic Porcelain & Ceramic Core Bits — 5/8-11 Thread and CNC (1/2" Gas)

Thin-wall diamond core bits for drilling ultra-compact sintered stone and large-format porcelain — Dekton, Lapitec, Neolith, Laminam — and ceramic floor and wall tile. A 2 mm rim drills fast and leaves smooth, chip-free holes in material from 6 mm to 30 mm thick. Two versions: 5/8-11 thread for grinders and drills, and 1/2" gas thread for CNC machines.

Features

  • Ultra-thin 2 mm rim for fast, clean drilling
  • Smooth, chip-free holes in porcelain and sintered stone
  • 5/8-11 thread for standard grinders and drills
  • CNC version with 1/2" gas male thread for Breton, Northwood, Park Industries and other CNC machines
  • Diameters from 1" to 3-1/2"
Part No.DiameterConnection
1428621 1/8"5/8-11 thread
1391931 3/8"5/8-11 thread
1428651 3/4"5/8-11 thread
1428662"5/8-11 thread
1428672 1/4"5/8-11 thread
1428682 3/8"5/8-11 thread
1428702 3/4"5/8-11 thread
1428713"5/8-11 thread
1428723 1/4"5/8-11 thread
1428733 1/2"5/8-11 thread
1428441"1/2" gas male CNC thread
1428451 1/4"1/2" gas male CNC thread
1391921 3/8"1/2" gas male CNC thread
1428461 1/2"1/2" gas male CNC thread
1428492 1/2"1/2" gas male CNC thread
Spec5/8-11 threadCNC (1/2" gas)
Total lengthabout 3-1/8"3-7/8" (100 mm)
Max drilling depthabout 1-7/8"1-7/8"
Recommended speed1,600–2,800 RPM1,400–2,800 RPM
Feed rate—3–4" per minute
BrandWeha
SeriesWeramic
Rim thickness2 mm
MaterialsDekton, Lapitec, Neolith, Laminam, large-format porcelain panels, ceramic floor and wall tile
Material thickness6 mm to 30 mm
UseWet use recommended
Not forEngineered stone, quartz or quartz agglomerate (manufacturer)
  • Faucet and plumbing cutouts
  • Drain and pipe holes
  • Anchor installations
  • Shop fabrication and jobsite modifications
Which version do I need?

Choose 5/8-11 for angle grinders and core drills with a 5/8-11 spindle; choose the CNC version (1/2" gas thread) for CNC machines.

Can I use them on quartz or engineered stone?

No. The manufacturer states Weramic bits are not for engineered stone, quartz or quartz agglomerate.

Wet or dry?

Wet use is recommended. Use wet cleanup methods and appropriate PPE.

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Use water or other dust control and follow OSHA silica-dust rules. Always wear appropriate PPE when using power tools.