Skip to Content
  1. All products
  2. Spare Parts
  3. Weha Locking Disc for T-31 Anchor Machine — Replacement Part for Stone Installation
  4. Spare Parts
Pricelist: General Price List (USD) Pricelist
Pricelist: General Price List (USD) Pricelist

Weha Locking Disc for T-31 Anchor Machine — Replacement Part

Replacement locking disc for the Weha T-31 anchor drilling machine used to install undercut anchors in stone for cladding and panel installation. The locking disc is part of the spindle clamp / tool-retention assembly.

Features

  • Replacement locking disc for the Weha T-31 anchor machine
  • Spindle clamp / tool-retention component
  • Direct-fit OEM replacement
PropertyDetail
BrandWeha
Part Number141913
TypeLocking disc — replacement part
Compatible SystemWeha T-31 Anchor Machine
Unit Weight1.1 lb (0.5 kg)
  1. Power off and lock out the T-31 machine before service.
  2. Remove the worn locking disc per the T-31 service documentation.
  3. Install the new disc and verify proper clamp action.
  4. Test on a representative anchor before returning to production.
  • Wear ANSI Z87 eye protection and a dust-rated respirator.
  • Inspect the tool/accessory before each use; remove from service if cracks, deformation, or excessive wear are visible.
  • Follow OSHA and local site safety procedures at all times.

Always wear appropriate PPE. Follow local safety regulations when using power tools or material-handling equipment.