Tenax Transparent Knife Grade H is a high-viscosity (knife/paste grade) polyester adhesive used to bond, fill, rebuild and repair stone both vertically and horizontally. It dries clear and colors easily to match the stone, becoming nearly invisible, and cures shiny and fully polishable.
| Property | Detail |
|---|---|
| Brand | Tenax |
| Manufacturer | Tenax S.p.A. (Italy) |
| Part Numbers | 1CAA00BG50 (1 Quart) · 1CAA00BJ10 (1 Gallon) · 1CAA00BJ50 (5 Gallon) |
| Country of Origin | Italy |
| Type | Knife-grade (high-viscosity) polyester adhesive |
| Color | Transparent — colorable to match stone; cures nearly invisible |
| Mix Ratio (Resin:Hardener) | 100:2–3 (cream/liquid hardener) |
| Gel Time | 4–5 minutes |
| Full Cure | 12–15 minutes |
| Finish | Cures shiny and polishable |
| Minimum Temperature | Not for use below 32°F (0°C) |
| Consistency | High-viscosity / knife grade (non-sag) |
Bonding, lamination, chip and crack filling, and rebuilding edges and seams on marble, granite and engineered stone, vertically or horizontally. To color-match, add pigment before the hardener, then add 2–3% hardener. Do not use below 32°F (0°C).
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
