Tenax Concrete H20 Prowax 1 liter

Tenax Concrete H20 Prowax is a blend of polymers that protects cement and cement agglomerate surfaces. The product enters the porosity of the material and creates a protective film that protects the cement from both organic and inorganic stains typically found in a domestic environment. Tenax Concrete H20 Prowax is also the ideal protective finish for porous stones, cottonmouths and non-glossy cement agglomerates.

Protects against organic and inorganic stains
Easy to use
Provides great shine
Removed with water-based wax remover
Water-based/non-solvent formula

Instructions for use:

Apply Concrete Prowax on a dry and clean floor. Spread a coat of full strength product evenly and continuously using a brush or fleece spreader so as to create little foam.

Wait at least 1 hour until the surface is dry. Then apply a second coat crosswise with respect to the first. The more product applied the more the surface will be protected and will be more shiny.

Based upon the porosity of the material we suggest to apply two coats ofÂ SKUDO UNIVERSAL PLUSÂ beforehand.

IMPORTANT:

Always test the product on a small hidden area first.
Close product tightly after use.
Temperature for application: 50Â° - 86Â°

Coverage

1 Liter will treat 161 - 215 square feet depending on the porosity of the material.

Shelf Life:

Keep away from heat, humidity and sun. Product will last at least 2 years if kept between 65Â°F - 77Â°F.

Safety:

Please read the safety data sheet before using.

1 Liter Concrete H2O Prowax Protectant Feature List

Protects Against Organic & Inorganic Stains
Easy to Use
Provides Great Shine
Removed With Water-based Wax Remover
Water-based, Non-solvent Formula

View Safety Data Sheet (SDS)