$ 50.26
$ 50.26
$ 50.26
Puma Finger Tip 20x20 M12 — Radial Arm Finger Bit
The Puma Finger Tip is a 20 x 20 mm finger-style polishing bit with an M12 thread, designed to mount on radial-arm edge polishing machines used in stone fabrication shops. Used for inside-radius edge polishing where standard cup or wheel tooling cannot reach.
Features
- Finger-tip bit for radial-arm edge polishing machines
- 20 x 20 mm working size
- M12 thread for direct radial-arm spindle mounting
- For inside-radius and tight-profile edge polishing
- For granite, marble, and engineered stone
| Property | Detail |
|---|---|
| Brand | Puma (distributed by Weha) |
| Part Number | 30535 |
| Type | Radial-arm finger tip polishing bit |
| Working Size | 0.79 x 0.79 in (20 x 20 mm) |
| Thread | M12 |
| Unit Weight | 0.40 lb (0.18 kg) |
| Compatible Materials | Granite, marble, engineered stone |
- Power off the radial-arm polisher before tooling changes.
- Thread the finger tip onto the M12 spindle by hand until snug.
- Verify thread engagement and concentricity before power-up.
- Run wet at the manufacturer's recommended speed.
- Wear ANSI Z87 eye protection and a dust-rated respirator.
- Inspect the tool/accessory before each use; remove from service if cracks, deformation, or excessive wear are visible.
- Follow OSHA and local site safety procedures at all times.
Always wear appropriate PPE. Follow local safety regulations when using power tools or material-handling equipment.