Skip to Content

Redeemer 4" Resin Abrasive

Premium 4" (99 mm) wet resin polishing pad for granite and quartzite, supplied in the SL3® Top Polish Kit. Delivers a superior, high-clarity polish with low operator fatigue.

Features

  • Runs at low speed (in-home) or high speed (in-shop)
  • Requires only minimal downward pressure — must stay wet
  • Produces less damaging heat than dry polishing methods
  • Available in 5 grits: 200, 500, 1000, 2000, 3000
Part No.GritOutside DiameterAttachmentUse
RD200-42003.9" (99 mm)Hook & LoopWet only
RD500-45003.9" (99 mm)Hook & LoopWet only
RD1000-410003.9" (99 mm)Hook & LoopWet only
RD2000-420003.9" (99 mm)Hook & LoopWet only
RD3000-430003.9" (99 mm)Hook & LoopWet only
  1. Mount the pad on an SL3® rigid backer and run wet.
  2. Step up through the grits for a progressively higher polish.
  3. Keep the pad wet at all times and use minimal downward pressure.
  4. Pro tip: add a little dish soap to the polishing water in homes for minimal spray.
Property Detail
Outside Diameter 3.9" (99 mm)
Attachment Hook & Loop
Use Wet only
Grits 200 / 500 / 1000 / 2000 / 3000
System SL3® Quick Change
What grits are available?

200, 500, 1000, 2000 and 3000.

Wet or dry use?

Wet only — keep the pad wet at all times.

What backer does it need?

An SL3® rigid hook-and-loop backer.

⚠ WARNING: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov. Always wear appropriate PPE.