Skip to Content
  1. All products
  2. Adhesives
  3. Colour Bond Dispensing Gun 10:1 Ratio - 250 ml
  4. Adhesives
Pricelist: General Price List (USD) Pricelist
Pricelist: General Price List (USD) Pricelist
Colour Bond Dispensing Gun 10:1 Ratio - 250 ml

Colour Bond Dispensing Gun 10:1 Ratio - 250 ml

(0 review)

Akemi steel frame dispensing gun for 10:1 cartridge adhesives such as Colourbond

Features

  • 26:1 Thrust Ratio
  • Drip-free mechanism prevents excess material flow
  • 3 Side bar design for durability, cartridge positioning,  and support
BrandAKEMI
Vendor Manufacturing NumberMISC.90500
Product Weight3.6 lbs

$ 65.10 $ 65.10
$ 65.10
Contact Us
Terms and Conditions

Akemi Colour Bond Dispensing Gun — 10:1 Ratio, 250 ml Cartridges

The AKEMI® Colour Bond Dispensing Gun is a professional, metal-framed applicator built to dispense AKEMI® Colour Bond and Match Bond two-component cartridges at their dedicated 10:1 mix ratio. Its high 26:1 thrust ratio drives the pre-colored adhesive smoothly through a static mixing nozzle, and an innovative drip-free mechanism cuts off excess flow the moment you release the trigger — keeping joints clean and reducing waste on invisible seam work in quartz and natural stone.

  • Dedicated 10:1 mix ratio — matched to AKEMI Colour Bond / Match Bond cartridges
  • High 26:1 thrust ratio — steady, controlled dispensing of thick adhesive
  • Drip-free mechanism — stops excess material flow for clean joints and less waste
  • Durable metal frame — three-side-bar design supports and positions the cartridge
  • Reusable tool — pairs with a fresh mixing nozzle for each cartridge
PropertyDetail
BrandAkemi
TypeManual cartridge dispensing gun (drip-free)
Mix Ratio10:1
Thrust Ratio26:1
Fits CartridgesAKEMI® Colour Bond / Match Bond 250 ml, 10:1
Frame MaterialMetal (three-side-bar design)
ReusableYes — use a fresh mixing nozzle per cartridge
  • Purpose-built for the 10:1 mix ratio of AKEMI Colour Bond and Match Bond cartridges
  • High 26:1 thrust ratio for smooth, controlled dispensing of thick adhesive
  • Drip-free mechanism prevents excess material flow, keeping joints clean and reducing waste
  • Robust metal frame with a three-side-bar design for cartridge support and positioning
  • Reusable across many cartridges when paired with a fresh mixing nozzle each time

Designed for: AKEMI® Colour Bond and Match Bond 250 ml, 10:1 two-component cartridges — the pre-colored epoxyacrylate adhesive system used to produce strong, near-invisible joints in quartz and natural stone.

  • Fit a fresh static mixing nozzle to the cartridge before dispensing.
  • Insert the cartridge into the frame and advance the plunger to prime the mixer.
  • Release the trigger to engage the drip-free stop and prevent run-on between beads.
  • Wipe the tool clean after use; replace the nozzle for each new cartridge.

Professional application tool. Use with genuine AKEMI® Colour Bond / Match Bond cartridges and mixing nozzles. Follow the adhesive’s Technical Data Sheet and Safety Data Sheet for handling and cure information.