$ 69.92
$ 69.92
$ 7,618.78
-
Size
Akemi Stain Repellent Nano-Effect — Solvent-Based Impregnating Sealer
AKEMI Stain Repellent Nano-Effect is a ready-to-use, weather-resistant, non-yellowing impregnation based on high-quality organic active substances. Drawn deep into the stone by capillary action without closing the pores, it gives absorbent natural and artificial stone an outstanding water-, oil-, grease-, and dirt-repellent finish with a distinctive pearl effect — while the surface stays fully breathable and looks virtually unchanged. It develops a water-repellent effect within minutes and reaches full protection in a few hours, making it a professional choice for countertops, tables, window sills, tile joints, and facades.
- Oil & water repellent — outstanding stain protection with a distinctive pearl effect
- Breathable — high vapor permeability; no surface film, so the stone can release moisture
- Non-yellowing & UV-resistant with no or only low color enhancement
- Anti-graffiti effect — evidently low paint adhesion on treated surfaces
- Food-contact safe after hardening (certified); emission class A+
This product is offered in the following options — select your choice above:
| Size | Item Reference |
|---|---|
| 250 mL | CARE.11931 |
| 1 L | CARE.11932 |
| 5 L | CARE.11933 |
| 30 L | CARE.11934 |
| 200 L | CARE.11936 |
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Ready-to-use impregnating stain-repellent sealer |
| Chemical Basis | Solvent-based impregnation on high-quality organic active substances (dilutable with AKEMI Nitro-Dilution) |
| Effect | Water-, oil-, grease- and dirt-repellent; vapor-permeable; distinctive pearl effect |
| Color | Transparent, colorless |
| Color Enhancement | None or only slight |
| Density | Approx. 0.78 g/cm³ (6.5 lb/gal) |
| Coverage | Up to approx. 270 sq ft per liter (up to 25 m²/L), depending on absorbency |
| Application Temperature | 50–86°F (10–30°C) |
| Full Protection After | 2–3 hours (water-repellent within minutes) |
| Emission Class | A+ (confirmed by an external testing institute) |
| Food Contact | Harmless after hardening (certified by an external German testing institute) |
| Tool Cleaner | AKEMI Nitro Thinner |
| Shelf Life | Min. 24 months, stored cool & dry at 41–77°F (5–25°C) |
- Very fast development of protective effect — water-repellent within minutes, full protection after 2–3 hours
- Outstanding water, dirt, oil and grease repellency (tested to DIN EN ISO 10545-14 and CTIOA T-72)
- Distinctive pearl effect with no or only low color enhancement
- Maintains breathability — high vapor permeability and no surface layer, so humidity is released during dry periods
- Non-yellowing, UV-resistant, and tack-free hardening
- Evidently low adhesion of paints on treated surfaces — an anti-graffiti effect on facades
- Emission class A+; harmless to health on contact with food after hardening (certified)
For water-, grease- and oil-repellent treatment of absorbent mineral surfaces:
- Polished, ground, or rough natural and artificial stone — marble, limestone, granite, gneiss, porphyry, sandstone, cotto, terrazzo, quartz
- Fine stoneware, concrete, cement tiles, and unglazed ceramic tiles
- Especially kitchens (coatings, countertops), bathrooms (wash tables, marble tiles), tables, window sills, tile joints, and facades (anti-graffiti)
Not suitable for: glazed and non-absorbent surfaces or plaster.
- Clean: the surface must be clean, completely dry, and free of all layers and coatings. Rinse well after cleaning and allow to dry — usually 1–2 days at the earliest.
- Sample area: prepare a 10–20 sq ft (1–2 m²) test area to check efficiency, appearance (color enhancement), and material consumption.
- Impregnate: shake well. Ideal conditions are 50–86°F (10–30°C) with protection from humidity for approx. 2–3 hours; the stone must not be warmed by underfloor heating or direct sun.
- Apply one to two coats wet-in-wet with a brush or mop. For less absorbent surfaces, dilute 1:1 with AKEMI Nitro-Dilution.
- About 20 minutes after application, and before it dries, completely remove any excess that has not been absorbed with a suitable cloth. Polished surfaces should be polished again until any blooming is removed.
- The water-repellent effect develops within a few minutes; full protection is reached after 2–3 hours. Clean tools with AKEMI Nitro Thinner.
- Solvent-based product — keep away from heat, sparks, and open flame.
- For professional use only. When spray-applying, avoid forming aerosols, protect third parties, and do not breathe vapors (wear a protective mask).
- Provide sufficient ventilation — approx. 2–3 days when used in food areas.
- If stored below 59°F (15°C) the product may thicken; warming to about 68°F (20°C) restores it to a fully liquid, homogeneous state.
- Industrial chemical product — wear chemical-resistant gloves and eye protection. Always read the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product for professional use. Solvent-based — keep away from heat, sparks, and flame, and use only with sufficient ventilation. Wear chemical-resistant gloves and eye protection, and a protective mask when spraying. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures and may vary with jobsite conditions.
Specifications
| Size | 1 L, 5 L, 30 L, 200 L, 250 mL |