$ 27.95
$ 27.95
$ 3,116.49
-
Size
Akemi Stone Impregnation Sealer (Solvent-Based, 1 L) — Silicone Water Repellent
Akemi Stone Impregnation Sealer is a solvent-based silicone impregnator for natural stone. The product penetrates the stone matrix and leaves a water-repellent barrier that protects the stone against water, oil, and salt staining without changing the natural surface appearance. It is the go-to outdoor and high-exposure sealer for granite, marble, sandstone, and similar porous natural stones.
Features
- Solvent-based silicone impregnator — penetrating sealer
- Water and oil repellent on natural stone
- Does not change the natural appearance of the stone
- Built for granite, marble, sandstone, and porous natural stone
- Suitable for indoor and outdoor exposure
- 1 L bottle — fitter / installer size
| Property | Detail |
|---|---|
| Brand | Akemi |
| Part Number | CARE.10834 |
| Product | Stone Impregnation (silicone water repellent) |
| Chemistry | Solvent-based silicone impregnator |
| Container | 1 L bottle |
| Application | Granite, marble, sandstone, porous natural stone |
| Effect | Penetrating — preserves natural appearance |
- Verify the stone is clean, dry, and free of any prior coating or sealer residue.
- Test on an inconspicuous area to confirm the desired effect and absorption rate.
- Apply liberally with a brush, roller, or lint-free cloth so the stone surface stays wet for the dwell time on the label.
- Wipe excess product before it dries on the surface — any residue must be removed within the dwell window.
- Let cure fully before exposure to water or service.
- Reseal periodically per the manufacturer's recommended service interval.
- Read the product Safety Data Sheet (SDS) before opening the container.
- Wear chemical-resistant gloves, ANSI Z87 eye protection, and appropriate respiratory protection per the SDS.
- Use only with adequate ventilation. Solvent and resin-based products may release VOCs during application and cure.
- Keep out of reach of children and pets.
- Store in a cool, dry place in the original sealed container; follow the SDS storage temperature range.
- Dispose of empty containers and unused product per local hazardous-waste regulations.
- Solvent-based — flammable. Keep away from heat, sparks, and open flame.
- Outdoor application: avoid use on stone that is wet, hot in direct sun, or below the SDS minimum application temperature.
Always read the product Safety Data Sheet (SDS) before use. Wear chemical-resistant gloves and eye protection. Use only with adequate ventilation. Follow all local regulations for storage and disposal of chemical products.
Specifications
| Size | 1 L, 5 L, 200 L, 250 mL, 30 L |