$ 1,257.04
$ 1,257.04
$ 1.00
-
Brand
-
Size
| Brand: Alpha |
Alpha® HEPA Wet/Dry Vacuum (HEPA1035 / HEPA1050)
The Alpha® HEPA Wet/Dry Vacuum is a safety vacuum cleaner that extracts harmful dust directly at the source — the power tool — with an automatic filter cleaning cycle every 45 seconds to keep suction power consistently high. Choose the 9.3-gallon HEPA1035 for compact, jobsite portability or the 13.2-gallon HEPA1050 for longer runtime between bag changes. Both ship with stainless-steel tubes, a 16.4 ft hose assembly, fleece bag, crevice and floor nozzles, round brush, and dual rubber adapters to fit most dust shrouds on the market.
Features
- HEPA 13 cartridge filter — automatic cleaning every 45 seconds with visual & acoustic warning
- OSHA Table 1 compliant for silica dust applications
- 120 V / 1080 W / 9.0 A motor with electric auto-start from power tool
- 157 CFM airflow; 92"–100" water lift for strong wet & dry pickup
- 33 ft (10 m) cord and 16.4 ft (5 m) x 1.5" hose assembly
- Built-in trolley handle and onboard accessory storage
- Two rubber adapters fit most third-party dust shrouds (21/25/32 mm and 38/43 mm)
- Optional adapter plate accepts Makita, Festool, DeWalt and Bosch toolboxes
- Low sound level: LpA = 74 dB(A)
| Part No. | Tank Capacity | Filter Capacity | Water Lift | Tool Weight | UPC |
|---|---|---|---|---|---|
| HEPA1035 | 9.3 gal (35 L) | 5.3 gal (20 L) | 92" (234.5 cm) | 33 lbs (15 kg) | 749173601217 |
| HEPA1050 | 13.2 gal (50 L) | 7.9 gal (30 L) | 100" (254.9 cm) | 35 lbs (16 kg) | 749173601224 |
- Open the lid, install a fleece filter bag onto the inlet stub, and seat the HEPA 13 cartridge filter in the motor head.
- Connect the 1.5" x 16.4 ft hose to the inlet and the other end to the power tool or dust shroud (use the supplied rubber adapter that matches the tool port).
- Plug the power tool into the auto-start receptacle on the vacuum, then plug the vacuum into a grounded 120 V outlet.
- Switch the vacuum to AUTO — it will start whenever the connected power tool is running and continue briefly after shutoff to clear the hose.
- For wet pickup, remove the fleece bag per manual instructions before vacuuming liquids.
- Listen for the audible warning / watch for the visual indicator that signals filter saturation; replace the fleece bag and clean the blow-out filter at that point.
- After use, coil the cord on the trolley handle and store nozzles and brushes on the onboard holders.
Alpha® HEPA Wet/Dry Vacuum — 9.3 gal (35 L) Tank — HEPA1035
| Part No. | HEPA1035 |
| UPC | 749173601217 |
| Type | Alpha® HEPA Wet/Dry Vacuum — 9.3 gal (35 L) Tank |
| Packaged Weight | 50.00 lbs |
| Package Dimensions | 23" x 16" x 33" |
| Commodity Code | 8508.19.0000 |
| Country of Origin | China |
Alpha® HEPA Wet/Dry Vacuum — 13.2 gal (50 L) Tank — HEPA1050
| Part No. | HEPA1050 |
| UPC | 749173601224 |
| Type | Alpha® HEPA Wet/Dry Vacuum — 13.2 gal (50 L) Tank |
| Packaged Weight | 52.00 lbs |
| Package Dimensions | 23" x 16" x 38" |
| Commodity Code | 8508.19.0000 |
| Country of Origin | China |
| Property | Detail |
|---|---|
| Voltage | 120 V, 50–60 Hz |
| Amperage | 9.0 A |
| Power | 1080 W |
| Airflow | 157 CFM |
| Cord Length | 33 ft (10 m), 3/14 AWG |
| Hose | 1.5" x 16.4 ft (5 m) |
| Filter | HEPA 13 cartridge, auto-cleaned every 45 sec |
| Sound Level | LpA = 74 dB(A) |
| Auto-Start | Yes — from connected power tool |
| Country of Origin | China |
How often do I need to replace the HEPA 13 cartridge filter?
The filter is auto-cleaned every 45 seconds, so replacement frequency depends on usage. The vacuum issues both a visual and an acoustic warning when the filter actually needs replacing.
Can I use a dust shroud that is not from Alpha®?
Yes. The HEPA Vacuum ships with two rubber adapters that connect to most popular third-party dust shrouds on the market.
What maintenance does the HEPA Vacuum require?
Alpha® recommends cleaning the blow-out filter whenever you replace the fleece filter bag. That is it.
Which toolboxes are compatible with the optional adapter plate?
Makita, Festool, DeWalt and Bosch toolboxes.
Does Alpha® offer matching dust shrouds?
Yes — Alpha® offers a full line of Dust-Free Guards for cutting, grinding and core drilling in multiple sizes.
Can I use the HEPA Vacuum with a 9" drywall sander?
Yes. OSHA Table 1 silica-dust compliance applies, so the HEPA Vacuum is suitable for use with 9" drywall sanders.
What is the difference between HEPA1035 and HEPA1050?
HEPA1035 has a 9.3-gallon (35 L) tank and 92" water lift; HEPA1050 has a 13.2-gallon (50 L) tank and 100" water lift. Both share the same motor, filter and accessory kit.
Newest and Best HEPA Vacuum on the Market Today
Drilling Holes for Pool Cover Anchors
Making a V40 Laminated Bullnose Edge
HEPA Waste Bag Installation
HEPA Waste Bag Removal
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.