Alpha Wet Blade Cutting Kit

1. Power off and unplug the angle grinder before any conversion work.
2. Remove the existing dry guard. Install the Alpha® wet safety guard and secure with the stainless steel and plastic collars to match your grinder neck.
3. Attach the Loc-Line water assembly to the safety guard. Route the kink-free water hose along the grinder body and secure with the hook & loop tie and memory wrap (3 ft / 1 m).
4. Connect the quick-connect adapter to a standard garden hose or water-feed source. Open the inline valve slightly to confirm flow at the blade.
5. Plug the grinder into the supplied GFCI plug (110V kits) before connecting to AC power. Always run wet kits through a GFCI.
6. Install a compatible wet diamond blade (Plus, Q-Cut, Porcellana, Sonic, Vetro, Vortex, Contour, etc.) following the blade manufacturer’s torque spec.
7. Start water flow first, then start the grinder. Cut with steady pressure — let the blade and water do the work.
8. After cutting, stop the grinder first, then shut off water. Disconnect from power before cleaning.

• Plus — wet diamond blade for granite
• Quad — dry flush-cutting blade
• Libero — dry blade for marble
• Q-Cut — wet blade for quartzite & granite tile
• Porcellana — wet blade for porcelain tile
• Sonic — wet cutting blade for tile
• Vetro — wet blade for glass tile
• Vortex for Granite — intricate & flush cutting
• Contour for Granite / Engineered Stone
• Contour for Porcelain
• Vortex for Marble

No frequently-asked questions are currently published by the manufacturer for this product. Contact us for application help — e-commerce@dynamicstonetools.com.

• WBC5KIT / WBC6KIT Instruction Manual (rev. 0624)
• WBC5KIT / WBC6KIT Instruction Manual (rev. 0121)
• WBC9KIT Instruction Manual
• Original WBCKIT Instruction Manual
• Wet Blade Cutting Kits Flyer
• WBC9KIT Flyer
• Ecoguard Solutions Flyer