$ 34.04
$ 34.04
$ 34.04
-
Brand
| Brand | Akemi |
New!
Akemi Surface Clean Ultra — Solvent-Based Cleaner for Suction Cup Marks & Residues
AKEMI® Surface Clean Ultra is a powerful, ready-to-use cleaner made from a blend of polar and nonpolar solvents. It removes the rings and marks left by rubber suction cups, along with sticky and greasy residues, from nearly all surfaces made of metal, natural stone and artificial stone, including quartz. The solvents dry without leaving any residue. Supplied in a 1 L (33.8 fl oz) can. For professional use only.
- Removes suction cup rings and marks left by rubber vacuum cups
- Removes sticky and greasy residues, including oil and grease
- Dries without residue — blend of polar and nonpolar solvents
- Ready to use — no dilution, applied by hand with a clean cloth
- For stone, quartz and metal — natural stone, artificial stone and metal surfaces
| Property | Detail |
|---|---|
| Brand | Akemi |
| Product Type | Ready-to-use solvent-based cleaner for stain removal and special cleaning |
| Chemical Basis | Solvent-based — blend of polar and nonpolar solvents |
| Concentration | Ready-to-use |
| Method of Application | Manual |
| Size | 1 L (33.8 fl oz) |
| Colour | Colorless, clear |
| Density | 0.83 g/cm³ (6.9 lb/gal) |
| Storage | Dry and cool, 41–77 °F (5–25 °C), in the closed original container |
| Shelf Life | At least 24 months from production when stored as directed |
| User | For professional use only |
| Manufacturer Part Number | 12128 |
- Removes marks left by rubber suction cups
- Removes sticky and greasy residues
- Powerful blend of polar and nonpolar solvents
- Solvents dry without leaving any residue
- Ready to use straight from the can
For nearly all surfaces made of metal, natural stone and artificial stone, including:
- Natural stone, marble, limestone and granite
- Quartz and ceramics
- Terrazzo, slate, concrete ashlar and cotto
- Acid-sensitive stones
- Glass
Surface finishes: polished, ground, fine-ground, satinated, bush-hammered, sandblasted, flamed, antique, sawn, rough sawn and rough.
Test first on quartz: because of the wide variety of synthetic resin-bonded quartz surfaces, compatibility must be tested on a sample area.
Not suitable for: plastic and painted surfaces, which the product may dissolve, or hot surfaces.
- Apply AKEMI® Surface Clean Ultra with a clean cloth and wipe away the dirt.
- For heavier soiling, apply the product directly and let it work for a few minutes. Then wipe off with a clean cloth.
- If necessary, repeat cleaning.
- Danger — highly flammable liquid and vapor. Keep away from heat, sparks, open flames and hot surfaces. No smoking.
- Causes serious eye irritation. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. Suspected of damaging fertility or the unborn child.
- Avoid breathing mist, vapors or spray. Wear protective gloves and eye protection.
- May dissolve plastic and painted surfaces. Do not use on hot surfaces.
- Do not expose the container to direct sunlight. Store in a well-ventilated place and keep cool.
- For proper waste disposal, the container must be completely emptied.
- For professional use only. Read the AKEMI Safety Data Sheet (SDS) before handling or using this product.
Industrial chemical product — highly flammable. For professional use only. Use only in well-ventilated areas, away from ignition sources. Wear chemical-resistant gloves and eye protection. Read the AKEMI Safety Data Sheet before use. Technical values are manufacturer figures and may vary with jobsite conditions.