$ 35.37
$ 35.37
$ 35.37
-
Step
Dryflex 5 4" Dry Polishing Pad
The Diamax PDH51 is part of Diamax stone fabrication tooling is engineered for professional shops producing countertops, vanity tops, and architectural stone. This product is designed to bring stone surfaces from rough grind through a high-gloss finish using a structured grit progression.
Manufacturer overview: 4" Dryflex 5 Step #1.
Features
- Diamax Diamax series tooling
- Manufacturer model code: PDH51
- Engineered for professional stone-fabrication workflows
- Designed for polishing pads applications
- Use only on equipment rated for the tool's operating speed and cooling method (wet vs. dry)
| Property | Detail |
|---|---|
| Brand | Diamax |
| Family | Diamax |
| Model / Part Number | PDH51 |
| Vendor Category | Polisher Dry |
| Product Type | Polishing Pads |
- Mount the pad on a hook-and-loop backer or velcro head sized for the pad diameter.
- Wet the work area continuously if using a wet polisher; dry-pad operation requires the dry-rated grit only.
- Run the polisher at the speed printed on the pad — typically 2,500–4,500 RPM for handheld stone polishers.
- Move the pad in steady overlapping passes; do not concentrate force on the pad edge.
- Step through the grit progression in order; skipping grits leaves scratch patterns visible at the final gloss step.
- Rinse the pad and the slab between grit changes.
- Rinse the tool with clean water after wet use to flush slurry from the matrix.
- Air-dry before storage; do not store wet tools in sealed containers.
- Inspect the tool for cracks, chipping, or excessive wear before every shift.
- Do not exceed the maximum RPM printed on the tool body.
- Replace the tool when cut rate drops noticeably or visible damage appears.
Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator. Follow OSHA silica-exposure rules and the tool manufacturer's operating instructions when fabricating stone.
Specifications
| Step | 1, 2, 3, 4, 5 |