Must I use the 3-port Relief Valve if a ball valve is already installed on my line?
No. You can order just the Filter/Regulator Kit (1030-0072) with adapter blocks and T-clamps, or build a custom assembly from individual manifold parts.
Will the system run on a 165 PSI compressor?
Not directly — the Alpha® Filter/Regulator is rated to a 145 PSI maximum. Set your compressor output to 145 PSI or lower before connecting.
How do I connect the manifold if shop piping is mounted close to the wall?
Alpha® offers 1/2" NPT Swivel Fitting Adapter Hoses in 1 ft., 2 ft. and 3 ft. lengths, plus 15–40 ft. mobile manifold hoses so the F/R can be repositioned closer to the point of use.
Where do I get replacement 5-micron filter elements?
Contact your authorized Alpha dealer, call Alpha at 800-648-7229 ext. 240, or order through the website BUY NOW tab.
Should I add an automatic in-line oiler for tool lubrication?
No. Alpha® does not recommend automatic oilers — oil buildup at the exhaust can stain work surfaces and congeal in cold tools, locking the mechanism. Lubricate manually with Alpha® Rust Inhibitor Oil (AIR-008) at end of each workday.
What happens if compressor oil reaches the filter?
Compressor oil will clog the 5-micron filter element. Service the compressor to eliminate the carryover and replace the filter element.
