$ 59.91
$ 59.91
$ 59.91
Diamax Cyclone Ultra Incremental CNC Bit for Stone Edge Machining
The Cyclone FBTU20RT is part of Diamax's Cyclone series tools deliver high-output performance for professional stone fabricators working granite, engineered stone, and quartz. This product is designed for CNC fabrication centers handling production-grade stone shaping and edge work.
Manufacturer overview: Cyclone Ultra Finger Tip for Dekton, 20mm x 20H x Reverse Thread M12 Bolt.
Features
- Diamax Cyclone series tooling
- Manufacturer model code: FBTU20RT
- Engineered for professional stone-fabrication workflows
- Designed for cnc tools applications
- Use only on equipment rated for the tool's operating speed and cooling method (wet vs. dry)
| Property | Detail |
|---|---|
| Brand | Diamax |
| Family | Cyclone |
| Model / Part Number | FBTU20RT |
| Vendor Category | CNC Tooling |
| Product Type | CNC Tools |
- Mount the tool in the CNC spindle with the correct collet.
- Run the program with the feed rate and RPM specified for the tool by the toolpath.
- Confirm coolant flow is reaching the cutting zone.
- Inspect the tool periodically during long programs.
- Rinse the tool with clean water after wet use to flush slurry from the matrix.
- Air-dry before storage; do not store wet tools in sealed containers.
- Inspect the tool for cracks, chipping, or excessive wear before every shift.
- Do not exceed the maximum RPM printed on the tool body.
- Replace the tool when cut rate drops noticeably or visible damage appears.
Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator. Follow OSHA silica-exposure rules and the tool manufacturer's operating instructions when fabricating stone.