$ 15,026.33
$ 15,026.33
$ 15,026.33
-
Brand
| Brand: Aardwolf |
Aardwolf FMVLA Fork Mounted Vacuum Lifting Attachment
The Aardwolf Fork-Mounted Vacuum Lifter FMVLA is a vacuum lifter for handling smooth, non-porous material. It is rated at 2,204 lb (1,000 kg), a 19.7" x 11.8" (500 x 300 mm) pad. Power/actuation: 12V-100A battery. Unit weight 606 lb (275 kg).
Features
- 19.7" x 11.8" (500 x 300 mm) suction pad
- Power: 12V-100A battery
- 0-90 deg tilt
- Weighs 606 lb (275 kg)
| Property | Detail |
|---|---|
| Brand | Aardwolf |
| Capacity Horizontal | 2,204 lb (1,000 kg) |
| Capacity Vertical | 1,676 lb (760 kg) |
| Suction Pad Size | 19.7" x 11.8" (500 x 300 mm) |
| Number of Pads | 4 |
| Weight | 606 lb (275 kg) |
| Power | 12V-100A battery |
| Air/Vacuum Flow | 2.0 CFM (55.8 L/min) |
| Tilt Range | 0-90 deg |
| Country of Origin | Vietnam |
- Inspect the vacuum pad seal for cuts, grit, or compression set before each shift.
- Charge or connect the pump power supply and confirm it primes.
- Seat the pad flat on clean, sound, non-porous material with no chips or seams under the seal.
- Draw vacuum and wait for the gauge to reach the safe zone before taking any load.
- Lift slowly and keep the load low; never stand or pass under a suspended load. Never exceed the rated 2,204 lb (1,000 kg).
- Set the material down fully, then release vacuum and vent the pad.
FORK MOUNTED VACUUM LIFTING ATTACHMENT | Aardwolf