$ 73.44
$ 73.44
$ 73.44
-
Brand
| Brand: Sattelite City Instant Glues |
Satellite City Hot Stuff Pro Kit HSK-2 — Complete CA Glue Set with Accelerator & Debonder
The Hot Stuff Pro Kit HSK-2 is a complete cyanoacrylate (CA) glue system in one box. It pairs all three Hot Stuff viscosities — thin Hot Stuff Original, medium gap-filling Super T and thick Special T — with a 6 oz NCF Quick aerosol accelerator and a 2 oz debonder, plus extra applicator spouts. Together they give the stone fabricator and repair pro full control over cure speed, bond strength and gap fill for bonding, seaming and chip repair.
| Property | Detail |
|---|---|
| Brand | Satellite City (Hot Stuff) |
| Product | Hot Stuff Pro Kit HSK-2 |
| SKU | HSK-2 |
| Hot Stuff Original (Thin) | 3 cps (water-thin) — sets in ~5 seconds on tight, non-porous joints |
| Super T (Medium) | 200—300 cps (syrup-like) — gap-filling, sets in ~10—25 seconds |
| Special T (Thick) | 1,150—1,500 cps — maximum gap fill, ~20 sec with accelerator / ~60 sec without |
| Accelerator | NCF Quick aerosol, 6 oz — speeds cure and lets glue cure on contact |
| Debonder | 2 oz — dissolves cured CA glue for cleanup and un-bonding |
| Extra Applicator Tips | Two extra spouts and overcaps |
- Three CA-glue viscosities — thin, medium and thick — for any bond gap or joint fit
- NCF Quick aerosol accelerator cures glue on contact and speeds slower thick grades
- Debonder included for cleanup and releasing accidental bonds
- Full control over cure speed, bond strength and gap fill in one kit
- Extra spouts and overcaps keep every bottle dispensing cleanly
Bonding, seaming and chip/scratch repair on stone and many other substrates. Use thin Hot Stuff for tight, well-fitting joints; Super T for small gaps; and Special T for larger gaps or vertical work. Apply NCF Quick accelerator to cure on contact, and use debonder to clean up or release bonds. Follow Satellite City instructions and work in a ventilated area.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.