-
Brand
-
Size
| Size | Gallon, Quart |
| Brand | MB Stone Care |
| Size | Gallon, Quart |
| Brand | MB Stone Care |
MB-9 Mold & Mildew Remover is a ready-to-use, professional-strength cleaner that removes mold and mildew staining and the odors associated with biological growth from natural stone, tile, grout and other hard surfaces. It is formulated for use on stone that household mold removers can etch or discolor, including marble, granite, limestone and travertine. The current formulation is a thicker gel that clings to vertical surfaces such as shower walls, backsplashes and grout joints for longer contact with the stain. No mixing or dilution is required: apply, let the product work, then rinse thoroughly.
| Part No | Size | Format |
|---|---|---|
| MB-9QT-S | 32 fl oz (1 quart / 0.95 L) | Ready to use, sprayer included |
| MB-9GAL | 128 fl oz (1 gallon / 3.79 L) | Ready to use, refill |
| Property | Detail |
|---|---|
| Brand | MB Stone Care |
| Product Name | MB-9 Mold & Mildew Remover |
| Product Type | Ready-to-use gel mold and mildew stain remover |
| Technical Rating | 3 of 5 (1 = easy, 5 = difficult) |
| Best Used On | Most natural stones, including marble, and other hard surfaces (test first) |
| Application Method | Spray, agitate, rinse thoroughly |
| Applicator | Sprayer (included with quart) |
| Dilution | None — ready to use |
| Available Sizes | 32 fl oz quart, 128 fl oz gallon |
| Developer | MB Stone Care® |
It is formulated for use on most natural stone surfaces, including marble, granite, limestone and travertine, and is designed to clean mold and mildew without etching or damaging stone. Because stone compositions vary, test in an inconspicuous area before full application.
Mold stains, mildew stains and the odors associated with biological growth. It is particularly effective in showers, bathrooms, grout lines and other high-moisture environments.
Usually no. It is formulated to work on contact, so staining breaks down with little or no agitation. Older or heavily embedded staining may improve with light agitation using a soft nylon brush.
Yes. MB-9 is widely used on polished marble and other sensitive natural stone. Test before full application, since stone compositions vary.
The gel-like consistency clings to vertical surfaces such as shower walls, backsplashes and grout joints, extending dwell time and reducing runoff.
No. MB-9 is formulated specifically for mold and mildew removal. For soap scum, mineral deposits or hard water buildup, use a dedicated soap film or mineral deposit cleaner such as MB-3 or Easy Scrub.
Leave it on the affected area until the staining disappears, typically within a few minutes. Do not allow the product to dry on the surface.
Yes. If it is used on surfaces that may contact food, rinse the treated area thoroughly at least twice after cleaning.
No. It removes existing mold, mildew and related staining but is not a permanent preventative coating. Ventilation, routine cleaning and moisture management are what keep growth from returning.
Yes, on many exterior stone and masonry surfaces affected by mold and mildew. Always test first and follow the rinsing procedure.
No. Never mix MB-9 with acids, ammonia or other cleaning chemicals. Use it only as directed by the manufacturer.
Gloves and eye protection are recommended. Work in a well-ventilated area and review the Safety Data Sheet before use.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.